Model #358354810 CRAFTSMAN Chainsaw, Gas

  • 16 Inch
    3 Results
  • 16 Inch
    3 Results
  • 16 Inch/carburetor Assembly
    3 Results
  • 16 Inch
    3 Results
Find part by diagram >

Question and Answers

Q:

358354810 Craftsman Sears chain saw 3.4 358354810 Craftsman Sears chain saw 3.4

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, due to the age of this particular chainsaw, the manual and literature have been discontinued from print, and we no longer have them available for download.

This symptom sounds like a partially blocked main jet within the carburetor, or a plugged air passageway. A carburetor adjustment will not likely make any difference for this issue. I would recommend taking the carb off the chainsaw, open it up, and do a thorough cleaning. A piece of small gauge bailing wire or a bread tie wire will help with unclogging the jet, and carb cleaner and a wire brush to clean any visible varnish. These smaller carbs can be difficult to clean, but there are some great YouTube videos that will show how to do it successfully. 

Due to the age of the unit, the carburetor as a whole has been discontinued, but there are still some carb components available such as the diaphragms. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 21, 2014
Q:

fuel to oil mixture for craftsman 3.4 model 358.354810 358354810 Craftsman Sears chain saw 3.4

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com. We, at Sears, value your service.
 
I am sorry and do understand your frustration when there is information needed on the chain saw.
 
Glad to help out.  I’m looking at your Craftsman Chainsaw model number 358.354810.

I'm sorry but the manual is too old and no longer in the system so that I can find out the exact facts with the oil/gas mixture.   I did find a very similar model and it says 1 regular gallon of gas to a 1/2 pint of oil.   Use Sears engine oil 32-36555 or any good grate 16.1 air cooled, 2 cycle engine oil.

1.  Gasoline must be clean and not over 2 months old.

2.  The correct measure of gasoline to oil is very important.
A.  Too much oil in the mix will foul the spark plug.
B.  Too little oil will cause the engine to overheat.

3.  Mix the fuel thoroughly in a container since gasoline and oil do not readily combine.  
A.  Do not try to mix fuel directly in the fuel tank.
 
Please "RESUBMIT ANY FURTHER QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry Jr -
Sears Technician
September 17, 2014
A:

Thanks. I'll try that.

Read More
Dave -
September 17, 2014
See more answers
Q:

Can I change bar length? 358354810 Craftsman Sears chain saw 3.4

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 358354810 and there is not an 18 inch bar for this model. The model uses a 16 inch and can not be replaced with an 18 inch bar.  
 
 
If you have further questions please resubmit your question with a additional details. Thanks for choosing Sears PartsDirect.com
 
 
 
.

Read More
Sherman_G_Wallace -
Sears Technician
February 24, 2014

Top Parts