Model #358352151 CRAFTSMAN Chainsaw

  • Pump Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Carburetor
    3 Results
  • Engine
    3 Results
  • Engine
    3 Results
  • Maintenance Kit
    3 Results
  • Maintenance Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

gas line schematic for sears chain saw

A:

Gas line routing is a needed before tackling the job of replacing the gas lines. I was able to locate a similar question that may help while you wait for the expert. I attached the link below. I hope this helps.

Read More
Barbara -
August 31, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 01, 2012
See more answers
Q:

crastmaman chain saw model 358352151

A:

I know how important it is to have the owners manual for your chain saw. An expert will be able to provide you with information regarding your owners manual. It usually takes 24-48 hours to receive a response. Have a good day.

Read More
Jackie S -
April 20, 2012
A:

Thank you for your question.

I will be happy to assist you. I searched all of our records and was not able to find a copy of the manual. I did not have any luck in line either. I am sorry the manual is no longer available. If you are having a particular problem with the saw please let me know. I will be happy to give you any information I can find.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
April 23, 2012
See more answers
Q:

I have around a 25 year old craftsman chainsaw. I'm trying to find out what kind of fuel mix and oil it uses. Model # 358.352151. Serial # 69 045862.

A:

I understand how important it is for you to have the proper oil mix in your chainsaw so that your chainsaw will run smoothly and I will be happy to help. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem: http://www.ordertree.com/cms/Poulan+Chainsaw+FAQ/240.html. I hope my link is useful.

Read More
Joseph P. -
October 30, 2010
A:

Thank you for your question.

I have checked and this saw was manufactured before 1987. An engine of this age would run a fuel oil mix of 32.1. The fuel ratio is usually molded into the fuel cap.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 31, 2010
A:

I have a Craftsman chainsaw model 358 355061 (manufactured in 1986) and the oil to gas ratio is 16 to 1 (8 ounces of oil to 1 gallon of gas). I believe your mix would be the same. A 32 to 1 mix would be 4 ounces of oil to a gallon of gas. To figure out how much oil to put into the gas you take128 and divide that by the ratio, for instance a 50 to 1 mix you would take 128 and divide that by 50 and the answer will be 2.56 ounces. 128 represents how many ounces there are in a gallon. I hope this was helpful.

Read More
tunaman61 -
November 04, 2010
See more answers