Model #358351610 CRAFTSMAN Chainsaw, Gas

  • Chassis/bar/handle
    3 Results
  • Cylinder/crankshaft/shield
    3 Results
Find part by diagram >

Question and Answers

Q:

Where can I get a keeper for the gear drum 358.351610

A:

Thank you for contacting SearsPartsDirect.com with your question about the part for your Craftsman Chain Saw. I am so sorry to hear the u shaped keeper was lost. I will be happy to help you with this. The keeper comes with the clutch washer. I have included the link for you to order the part. You will be able to see a photo of the washer and the keeper that comes with it. 

Clutch Washer Kit for Craftsman Chain Saw 358.351610.

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 12, 2014
Q:

how to replace a chain brake kit 358351610 Craftsman Chain saw

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.”

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

routing information

A:

Installing the fuel lines can seem problematic. I did find some information for you, to help you with the routing. I am adding the link below to help you with your question while you wait for your expert response. I hope this will get you back up and running.

Read More
Marc H -
March 28, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 30, 2012
See more answers

Top Parts