Model #358351210 CRAFTSMAN Chainsaw, Gas

  • Chainsaw
    3 Results
  • Chassis
    3 Results
  • Carburetor
    3 Results
Find part by diagram >

Question and Answers

Q:

How do you remove the cluth to replace clutch drum 358351210 Craftsman Chainsaw

A:

Thank you for your question.

 

I am sorry you are having a problem with the chainsaw. I will be happy to assist you with removing the clutch. Remove the bar and the chain from the chainsaw first. Next, you need to remove the spark plug. Now look into the spark plug hole and pull the starter rope slowly. You want the piston all the way down. Then fill the engine cylinder with soft clean rope so it will jam the piston. Be sure to leave the end of the rope out so it can be removed. If you happen to have a clutch removal tool, you can use it to remove the clutch. If you do not have the clutch tool, you can use a hammer and punch. Place a metal punch or chisel on the outer edge of the clutch. Make sure you are on the clutch and not the drum. Rap the chisel with a hammer to rotate the clutch in a clockwise rotation. The clutch will unscrew from the crankcase shaft. It will normally screw off easily.

I found a video that shows how to remove the clutch. Click here to watch the video.

I hope this is helpful. Please let me know if you need further assistance.

 

 

Thank you for using Manage my life.

Mark

Read More
Mark T -
Sears Technician
September 02, 2013
Q:

where can I download a free repair manual for craftsman chain saw Model 358-351210?

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the type of repair your trying to do so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Jackie S -
December 01, 2011
A:

I have to replace the drum sprocket on my Craftsman chain saw. I would like to know, ahead of time, the proper way to disassemble and re-assemble the parts.

Read More
Frank -
December 01, 2011
A:

Thank you for your question.

I will be happy to assist you. I have looked up the model number you have submitted. We do have the manual listed on our website. Please click here to load the manual. Once the manual is loaded you can save a copy to your computer and/or print a copy.

I hope this is helpful. Please let me know if you need further assistance on the saw.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 01, 2011
A:

Thank you, Mark! only problem that I have is that when I click "here" it does not connect me to the file. Please suggest a solution.

Read More
Frank -
December 01, 2011
A:

I am sorry the link did not work for you. I have emailed a copy to the email address we have on file. Please let me know if you cannot open that copy.

Read More
Mark T -
Sears Technician
December 02, 2011
A:

papajjr@frontier.com

Read More
Jim -
August 30, 2013
A:

I tried to email the manual to you but it would not send. There is a problem with the address. Try clicking on the link I posted previously posted. I tried it today and it worked. I hope this is helpful. Please let me know if you need further assistance. Mark

Read More
Mark T -
Sears Technician
August 31, 2013
See more answers
Q:

Ask your own question or join this conversation

A:

Hi ron, Trying to remove broken screws can ruin your whole day. I found some general information on the for removing broken screws from pretty much anything. You can view it if you like. You may also want to check the manual. I found the link with diagrams for your chainsaw. I attached the links below. hope this helps!

Read More
Barbara H. -
July 02, 2010
A:

We don't have illustrated instructions for replacing broken mounting screws on the base of the chainsaw engine.

If the screws are broken, they will have to be drilled and an easy out used to remove them. The screws are harder than the aluminum of the base and it makes them very difficult to remove.

You might be better off to consider replacing the chainsaw.

I am sending a link to www.sears.com showing the chainsaws.

http://www.sears.com/shc/s/s_10153_12605_Lawn%20&%20Garden_Handheld%20Power%20Tools_Chain%20Saws?keyword=chain%20saw&prop17=chain%20saw

Read More
Jimmy K -
Sears Technician
July 06, 2010
See more answers

Top Parts