Model #358351142 CRAFTSMAN Chainsaw, Gas

  • Chain Saw
    3 Results
  • Engine
    3 Results
  • Carburetor Asm Kit #530069703
    3 Results
Find part by diagram >

Question and Answers

Q:

craftsman chainsaw

A:

Chainsaws are a great power tool. The fuel lines falling to pieces can be a hassle. I did find some information for you. I am adding the links below to help you with your question while you wait for your expert response. I hope this will help you get the chainsaw up and running again.

Read More
Marc H -
April 06, 2012
A:

Thank you for your question on the fuel line replacement on the chain saw.

I will give you a video of a Poulan chainsaw fuel line replacement and the 358. source Craftsman chain is a Poulan built product so this should work for you.

You will want to cut the end of the fuel line on a sharp angle so you can get then into the fuel hole more easily.

You may also need a pair of long forceups to aid in pulling the line into the tank.

I will also give you a diagram for the fuel line path.

Fuel line replacement video for a 358. Craftsman chain saw .

I would suggest getting a new primer bulb also for your chain saw.

Primer bulb kit for 358.351142 chainsaw .

Fuel line kit for 358.351142 chainsaw .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
April 07, 2012
A:

Thanks very much Sam!

Read More
Tom -
September 04, 2013
See more answers
Q:

How do the fuel lines on my chainsaw route?

A:

We aren't given specific schematics for the fuel lines for some reason. But we do have a basic schematic provided by the manufacturer that is pretty easy to understand. I will attach what I have as a photo file for you.

Read More
XX Wade_ -
Sears Technician
June 24, 2009
A:

thank-you for the diagram. I'll see if I can find where the second hole is in the tank

Read More
adalnken -
July 19, 2010
A:

how do we see this photo file?

Read More
d -
February 28, 2013
See more answers
Q:

14" chainsaw Model 358351142

A:

I know that it can be very inconvenient for you not to have your chain saw working properly. While your waiting for a detailed reply from an expert. I have provided the link below. Good luck on the repair.

Read More
Yadira B -
October 18, 2012
A:

Check the fuel lines to make sure they are not cracked. If the fuel lines look good then you will most likely need to service the carburetor. You can watch the video at the link I've attached below to see this procedure and that should get you on your way to getting this back to normal.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 18, 2012
See more answers

Top Parts