Model #358351063 CRAFTSMAN Chainsaw, Gas

  • Chassis/bar/handle
    3 Results
  • Cylinder/crankshaft/shield
    3 Results
  • Carburetor
    3 Results
Find part by diagram >

Question and Answers

Q:

I have had issues with the gas cap and now I can not get it back on. 358351063 Craftsman Chain saw

A:

Thank You for contacting SearsPartsDirect.com

I understand your frustration when the gas cap won't go back on your chainsaw. I would recommend getting a new gas cap because if you file down the threads you risk a gas leak and a fire. 

I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.


Fuel Cap Assembly for Model 358.351063

If you need further assistance please respond below. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
April 11, 2014
A:

I have found info on another site, "Yep it is the ethanol. When these saws were made corn liquor was only moonshine. Not a gas additive." The ethanol causes the cap to expand. If the cap is removed and left to dry, I'm told, the cap will fit again. I'll keep two caps arround.

Read More
Mike -
April 11, 2014
See more answers
Q:

install primer gas hose

A:

I've attached a link to a video that should help you get this taken care of. You an pick up fuel line (as much as you need, in the sizes you need) from most hardware stores. They will sell it by the inch or foot (depends on where you go).

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 23, 2013
Q:

I have a chainsaw that runs great won't restart till it cools off.

A:

I'm sorry to hear that you are having some difficulties with your chainsaw, its important to get it restarted so that you can finish the project. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assistance for you.

Read More
Joseph P. -
November 21, 2011
A:

This could very well be due to the fuel. As more and more areas have only ethanol blended gasoline available we see problems like this. The ethanol causes the engine to hydro-lock, making it very hard to restart. If you pick up a fuel treatment made to work on ethanol fuels and mix it with your gas you will likely see this problem subside.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 23, 2011
See more answers

Top Parts