Model #358350940 CRAFTSMAN Chainsaw, Gas

  • Fig. 1
    3 Results
  • Fig. 2
    3 Results
  • Fig. 3
    3 Results
  • Fig. 4 Carburetor No. 34034
    3 Results
  • Maintenance Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore 110 2600 series washer question. 358350940

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 11026002010 and from your description I would suspect a problem with the lid lock. If it is not locking correctly I recommend checking items 8 the lid lock strike and verify that it is making proper contact with the lock item 14. Here is a link that may help with additional troubleshooting. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

 

Read More
Sherman_G_Wallace -
Sears Technician
February 05, 2015
A:

Hi Sherman - thank you for your timely response. I neglected to mention that this is an intermittent problem.

Read More
Joe -
February 05, 2015
A:

Additionally, the lid does lock. The machines sensing light stays on and the lock eventually releases.

Read More
Joe -
February 05, 2015
See more answers
Q:

chainsaw starter rope hard to pull

A:

When an appliance or tool is broken, the Managemylife web site is a good resource to find out what may be happening and what options you have. I'm sorry to hear about the difficulties your experiencing with your Craftsman Chain Saw. I did some research for you at Searspartsdirect.com and found your specific model chainsaw so you can view and price parts. I hope you find this information helpful until your expert can respond to your specific question.

Read More
James -
August 30, 2011
A:

You will need bearing number 530032021 and crankshaft seal number 530019051. Both parts are available HERE .

If you have any further questions please let us know.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 31, 2011
See more answers