Model #358350880 CRAFTSMAN Chainsaw, Gas

  • Flywheel Assembly
    3 Results
  • Pump Assembly
    3 Results
  • Crankshaft-358.350870
    3 Results
  • Handle Assembly
    3 Results
  • Handle Assembly-358.350880
    3 Results
  • Carburetor
    3 Results
  • Maintenance Kit
    3 Results
  • Chassis/bar/handle
    3 Results
  • Cylinder/shield/crankshaft
    3 Results
Find part by diagram >

Question and Answers

Q:

can anyone tell me what the adjustments for the high speed and idle speed on a craftsman 2.6 cu.in chainsaw 358350880 Craftsman Sears chain saw

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about how to adjust the idle speed on your Craftsman chain saw model 358350880. I will be happy to help you with this. I have included the link below for you to view the owner’s manual online.

Owner’s Manual for Craftsman Chain Saw model 358350880

The instructions for adjusting the idle speed begin at the bottom of page 19 of the manual under Carburetor Adjustment. I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
October 07, 2014
Q:

Looking for gas cap replacement for my chain saw, leaking gas 358 350880

A:

Thank You for contacting ManageMyLife.com

I understand your frustration when the website tells you the part is not available. After researching your model I show that there are two chainsaws with the same model number. A 1980's model and a 2009 model. If you have the newer model the gas cap is still available and I have provided a link below to order the cap. If you have the 1980's model, that gas cap is no longer available due to the age of the chainsaw.

Gas Cap for (2009) Model 358.350880

If you have further questions please let me know.
Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
September 18, 2013
Q:

Why does my gas cap on my chain saw start hard to thread and I need to use pliers to screw it down?

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
September 01, 2011
A:

you have a bad starting thread not alllowing it to turn on the first thread . or a possible bad fuel cap. you can look to see if its worn or broken on the neck or gas cap if its the cap its easier to replace than the neck to the fuel tank. if it is the fuel tank with worn or broken threads you will need to replace the gas tank. good luck

Read More
john -
September 01, 2011
A:

I ordered a new gas cap. Won't know until I get it and try it.

Read More
Steven -
September 01, 2011
A:

Remove the fuel cap and inspect the threads on both the tank and cap. I've run into this before where the threads were good and the problem was that the tank had expanded from heat causing problems like this. The only thing that can really be done is to replace the tank.

If you do indeed have to go that route, you can go HERE with the model number to get a new tank.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
September 02, 2011
A:

It was the gas cap only. Put new one on and works GREAT. I'm glad I followed my first choice and spent alot less money to fix.

Read More
Steven -
September 11, 2011
A:

Bought this saw some years ago, nothing but trouble from the get go. The oil pump never gave enough oil when cutting, chain, bar and entire saw overheated, couldn't re-start the saw when I shut it down. Brought it back to sears, they said they fixed it but same problem prevailed. I had to oil the chain by hand while cutting. Gas cap was hard to remove and put on. Just tried to order a new one and they say this item is no longer available. Will never buy a chain saw from Sears again. I already had to buy a new one from another company. Sad story!!!

Read More
frank -
September 17, 2013
A:

frank, I am sorry to hear you have had so many problems with the saw. These saw are usually very reliable. If you would like me to search for a fuel cap for the saw, please reply below with the model number. The saw was likely manufactured by poulan. I can usually find replacement parts for them even though we do not have it any longer. I hope to hear from you. Thanks, Mark

Read More
Mark T -
Sears Technician
September 18, 2013
See more answers

Top Parts