Model #358350871 CRAFTSMAN Chainsaw, Gas

  • Flywheel Assembly
    3 Results
  • Pump Assembly
    3 Results
  • Handle Assembly- 358.350831
    3 Results
  • Handle Assembly-358.350881
    3 Results
  • Carburetor
    3 Results
  • Maintenance Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

craftsman chainsaw model #358.355051 20/14

A:

Instructions are important to have especially when it comes to fixing problems on your tools. While you are waiting on an expert to answer your question, I was searching the Sears Parts Direct website and found your diagram. I have attached the link below. Hope this helps!

Read More
Dezeray S -
June 06, 2011
A:

Thank you for your question Don.

I can understand wanting to have the manual for this older chain saw.

I am sorry that we do not have this manual for this older chainsaw in the web-site to download but it is available for purchase from:Sears Parts Direct . The part number for the manual is: 530066852 for about $12.00.

In looking at the parts breakdown you will need to remove the two screws that secure the top cover with the choke knob and then remove the screw from the handle to gain access to the fuel line that goes through the handle and down into the fuel tank.

You might want to go to the parts direct web site and put in the model number to look at the parts breakdown.

You will also need to remove the starter housing to get to the fuel tank.

Parts image .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 07, 2011
A:

I have a craftsman chainsaw thatI bought at a yard sale model # 358.3555051 and it runs great. I would like to know how old it is and how much did it cost new. Thanks.

Read More
Todd -
August 24, 2011
A:

Thank you for your question on the chain saw Todd. It looks to be around 1983. You have to use the serial number to figure that out. Usually the first few digits are the days of the year and the last ones are the year of production. As an example the one on the original question was 14900830. The 149th day of 1983. It is a little difficult to remember that far back as to cost of the unit, but I would say a $100.00 or less. Sam A.

Read More
Sam A -
Sears Technician
August 25, 2011
A:

well that makes no sense to me as my serial number is s4015397 model number 358.350871. i have looked and looked and looked and cannot find the manufacture date anywhere... all i want to know is how old the saw is.. it was found in a shed that my friend bought and i am currently waiting a new coil as it has no spark.. just thought i would try to find a little info on it while it sits in peices in my shop..

Read More
marty -
June 24, 2012
A:

Thank you Marty for the update. The model number you have listed in you last thread I looked and found in parts pictorial, very small print that said it was made in November of 1975. I hope this will help. Sam A

Read More
Sam A -
Sears Technician
June 25, 2012
A:

I too have a Craftsman/ Poulan 2.0 with a 14 inch bar m/n 358.3555051 s/n 1E1682039 directions on saw say 1/2 pint to a gal of gas. If this is right that would be 16 to one mix ratio. Right? I have not been able to find any service information on this saw. It does run great presently but would like for future reference. I did order manual for the 2.99 as listed but am sure will not have much service info. Any help would be great!

Read More
Gary -
October 04, 2013
See more answers