Model #358350670 CRAFTSMAN Chainsaw, Gas

  • Cylinder/shield/crankshaft
    3 Results
  • Chain/bar/handle/housing
    3 Results
Find part by diagram >

Question and Answers

Q:

Craftsman chainsaw starter recoil repair 358.350670

A:

Also is there an assembly instructions that come with the spring to establish where everything gets attached to?

Read More
Brian -
June 29, 2015
A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman chainsaw.

From the information you have provided above, I can understand the frustration of having your starter malfunction, after researching model number 358.350670. the rope does not come with part 25. The spring does along with the pulley  the rope is number 28 on the diagram.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 01, 2015
See more answers
Q:

craftsman/poulan chainsaw wont start

A:

Having a Chain Saw is a very good investment specially if your a man who works around the house. A suggestion I have while you are waiting on an expert to answer your question. I found this really great link on Chain Saw. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
October 12, 2010
A:

You have fuel and fire. The only thing we don't know for certain about is compression. If you have a way to test it, I would. The compression should be around 100PSI. If the compression looks good or you have no way to check it, take the muffler off and make sure the spark arrestor screen is not plugged up. That can keep them from starting.

If all of that looks good, there has to be something that we're missing. A large air leak could cause this problem. But that sort of air leak you would normally be able to notice right off. As much as I hate to say it, if nothing I've mentioned is coming up as being the issue you will have to have it looked at by a technician. A fresh set of eyes on the machine could do wonders to getting it back going.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 12, 2010
See more answers

Top Parts