Model #35834110 CRAFTSMAN Chainsaw, Electric

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Model # 358.34110 358.34110

A:

Good afternoon..... I can fully understand your concern regarding this issue. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
January 29, 2013
A:

Thank you very much. Will there be a charge for this info? Thank you again. GSH Sr

Read More
GARY -
January 29, 2013
A:

Thank you very much. Will there be a charge for this info? Thank you again. GSH Sr

Read More
GARY -
January 29, 2013
A:

Thank you for your question.

I am sorry you are having a problem with the saw. I searched for an image of the fan on our site and on line. I could not find a good image of it. I suspect the fan is secure like most others of this nature and it is just pushed onto the shaft. If you have a way of taking pictures of the shaft and fan I will be happy to look at them to see if this is the case on your motor. We do not charge for our services on this site.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 31, 2013
See more answers
Q:

while cutting limbs the gear started to race & chain stopped moving. Does this mean the gearing is stripped or is their a brakaway gear pin like a snowblower?

A:

Sometimes it can be difficult to do things on your own. A suggestion I have for you is going onto the Sears.com website and searching for a local store near you where they can fix your problem. I have attached the link below. Hope this helps!

Read More
Alina F. -
October 02, 2010
A:

It sounds like a gear is stripped on your saw. You can take the gear cover off and have a look at the gears to see if they look damaged. I'm pretty sure you will fine one (or both) of the gears damaged.

You can go HERE to view the parts images for your saw and order any parts you may need.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 02, 2010
A:

I'm handy with tools but I have not taken it apart to determine whether the drive gears are pressed on the shaft in such a way you need a special puller to replace them. Also I don't know if it's worth repairing - my exp w sears lawn mover repair is there is a minimum charge like $25 OR $45 plus additional time and materials. I see

Read More
Raygg -
October 02, 2010
A:

It looks like the big gear is held on with a nut and washer. The pinion gear is held on with spring clip. So taking them off should be no big issue that I can see.

Read More
XX Wade_ -
Sears Technician
October 02, 2010
See more answers