Model #358341040 CRAFTSMAN Chainsaw, Electric

  • Electric Chainsaw
    3 Results
Find part by diagram >

Question and Answers

Q:

Chainsaw Switch 358.341040 Craftsman Electric chainsaw

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
June 13, 2013
A:

So far I have not pulled up a good answer to your problem.  I believe the switch you are asking about is the circled part key 1 in the image below.  Please confirm that part key one, the safety switch is the switch you wish to replace.  Please reply below and confirm the switch you need and I will try to find further information on this problem. 

Read More
Fred M -
Sears Technician
June 15, 2013
See more answers
Q:

chainsaw switch

A:

Want to know how to remove the switch on the Craftsman chainsaw, just ask experts on managemylife.com. I am providing the link to help you in removing the old switch. Hope this helps while an expert responds with more information.

Read More
Anna T -
May 14, 2012
A:

You'll need to take the sides (the casing) apart on the saw in order to access the switch. You may be able to just loosen the screws in order to pull the switch out, but usually one side or the other will have to be taken all the way off for the switch to come out. Once it's out, simply take the wires off the old one and put them onto the new switch exactly as they are connected to the old one.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
May 16, 2012
A:

To remove old switch do you have to cut the wires or is there a way to take them out of switch without cutting. there is no screw to be removed the housing is secured with a rivet

Read More
Chuck -
June 13, 2013
A:

If the wires are not plugged into the switch, as you described, then just cut the wires and splice to the new switch. If the new switch has spade terminals, then you'll need to put spades onto the wires and then plug them into the new switch.

The rivet is odd, but not something I've never seen. You may have to drill it out and then use a screw/nut to secure the new switch.

Read More
Wade_B -
Sears Technician
June 15, 2013
See more answers
Q:

Chain saw sharpening

A:

I understand that you want to sharpen the blade on your chainsaw. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
July 10, 2012
A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you submitted. The correct filing angle for the S52 is 30 degrees, if you are using a round file please use the 5/32. If you are using a grinder, the 1/8� wheel is the appropriate wheel.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
July 12, 2012
See more answers

Top Parts