Model #351226712 CRAFTSMAN Sander

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Sander model no. 351.226712 351.226712

A:

The outer part of the bearing should fit snug without spinning inside the tracking wheel. If the bearing is not fitting snug, the tracking wheel will need to be replaced. Also, the bearing should slide over the shaft without having to tap it on unless the shaft is scored or rusted or damaged. Clean the shaft with steel wool and the bearing should slide over the shaft. 

Read More
Joey S -
Sears Technician
November 10, 2014
A:

Thank you for the response and info. I will order both parts and try it. Have o good day

Read More
Wayne -
November 10, 2014
See more answers
Q:

Belt sander pt no. 351.226712 351.226712

A:
Samantha A -
Sears Technician
November 07, 2014
A:

I see that a response from Samantha A was given to my question but I am unable to open it to get the answer. Please advise

Read More
Wayne -
November 09, 2014
See more answers
Q:

schematic for saw band.

A:

It's always a great idea to have specific information on your tools or appliances no matter for what reason. Down bellow i have placed some links that might help you along. The first link is the Owner's Manual and the second one is a diagram of the saw. I hope that it helps you, while you wait for the experts response.

Read More
celene -
April 25, 2011
A:

Thank you for your question.

I can understand wanting to have the wiring diagram for you power tool.

I will need to ask you for some clarification on you power tool question.

The model number you have given me is for a belt and disc sander not a Band saw.

If you could verify the number and reply with the information I will be glad to help you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 26, 2011
A:

Sam i don't know how this became a band saw. It's a 1inch belt and disc sander model # 351.22612 and what i need is the wiring diagram for themotor. there are four wires red 2 black and a white. there are a red and black wire comming out of the motor and a white and black on the power cord. hope you can help. thanks Jim

Read More
james -
April 26, 2011
A:

Thank you for the update. I think I have figured out what this tool is. The model number 351.22612 is a current model number for a band saw. 351.226712 Is a, One inch belt and 6 inch disk sander grinder is from the mid- ninety´┐Żs. I will send you the wire diagram for this model in the image below, and I hope it is the right product. This model has a relay and a start capacitor. Thank you for using Manage My Life. Sam A.

Read More
Sam A -
Sears Technician
April 26, 2011
See more answers

Top Parts