Model #35122638 CRAFTSMAN Sander

  • Motor
    3 Results
  • Belt Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

where can I buy 2"x 42" 120 grit sanding belt for the model 351-22638 Belt/Disc sander?? 35122638 Craftsman 2x8" belt & disc sander/grinder

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

Sears.com will be the best place to find this size of sanding belt, 2"X42". They offer it in multiple abrasives, including 120 grit.

For convenience, I have included a blue link below that you may click on to be directed to Sears.com to view and purchase the needed sanding belts.

2"X42" 120 Grit Sanding Belt

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 23, 2013
Q:

how to change the belt 35122638 Craftsman 2x8" belt & disc sander/grinder

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com! 

 

 

Read More
Yadira B -
April 03, 2013
A:

Thank you for your question and I understand your concern.
 
I was not able to locate the Owner's Manual. It appears by the image, to access and replace the belt; the two knobs/fasteners on the right side of the belt cover will need to be taken out. Remove the belt cover. On the other of the belt housing is lever. The lever is connected the belt tensioner. Rotate the lever to release the tension. While the belt tension is released, slide the belt off of the three rollers. Reverse the procedure to install the new belt.
 
The round disc has a self-adhesive backing and it will peel off and the new sanding disc will stick on. 
 
 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 05, 2013
See more answers
Q:

How to replace sand paper belt on Craftsman 2x42 Sander/Grinder

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
November 25, 2011
A:

I am sending 2 images showing how to replace the belt and adjust the tracking of the new belt if needed.

If you have questions, reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
November 28, 2011
A:

show me the images

Read More
kip -
April 03, 2013
See more answers

Top Parts