Model #351217520 CRAFTSMAN Lathe

  • Lathe
    3 Results
  • Lathe
    3 Results
Find part by diagram >

Question and Answers

Q:

Will this tool rest fit a 113.228630 tool rest carriage. I want to tun pens and the current rest is too big. 351217520 Craftsman Midi lathe

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
January 14, 2014
Q:

Having trouble leveling my bed extension for my lathe

A:

I am sorry that you are having some difficulties with your lathe and I will be happy to help. I did some research and I was able to find two articles that will provide you with some good information. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
May 16, 2012
A:

Thank you for your question on leveling your lathe bed.

If the information that Joseph P. does not help you I will need a little more information about you lathe.

Is this bed extension an addition to the regular length bed?

I need to know what brand and what model number lathe you are working on.

Please reply with a model and I will be happy to help you.

Sam A.

Read More
Sam A -
Sears Technician
May 21, 2012
A:

The lathe model no. is 351.217520, the extension is an add on to lenghten the bed another 18 inches. The sears item no. for the extension is 009666930.

Read More
keith -
May 21, 2012
A:

Thank you for the update on the model and stock number. These leveling screws are just there you get the extension bed lined up to get the bed level before you tighten the through bolts. Make sure the elevation screw is not making contact with the through bolt on that side. You can either take the elevation screw out on that side or as you said remove a little material to get the clearance you need to get the bed level. Please let me know how it worked out. Sam A.

Read More
Sam A -
Sears Technician
May 21, 2012
A:

I'm going to have to remove metal the leveling screw is already out, and it still to high. Thanks for the help Sam bye.

Read More
keith -
May 21, 2012
See more answers