Model #3.3T HORIZON Treadmill

  • Treadmill
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore HE3t does not drain, pump makes whirring chatter noise when draining.

A:

Hello, I see your having problems with your washer showing "F02" and "SUD" codes. I found this great website on codes. I attached the link below. Hope this helps!

Read More
Dezeray S -
August 02, 2010
A:

From the description you give I would suggest replacing the drain pump 8181684 would be a good place to start.

The suds error and F02 error can also be caused by the pressure switch being blocked or the air trap being blocked but from your description I'd start with the drain pump.

The image below may be helpful to you.

Remember to unplug the washer first.

Read More
Fred M -
Sears Technician
August 03, 2010
A:

Thanks for the help - I'll order the pump and let the board know if that was the solution. Thanks again

Read More
Michael -
August 03, 2010
A:

I have the HE 3, not the HE 3T and I also have a pump problem. Mine will drain but makes a loud clicking noise when operating. Some times the cycle will stop, other times it will finish the cycle. I took the pump apart and can't see any problem- it looks brand new. I was told that parts are not available and I have to purchase the whole mechanism for $140. Seems like a huge waste. I found I can pull on the impeller and the shaft and impeller will come out of the motor assembley. I can't find anything that looks like it would cause the unusual noise. Rotating the impeller in one direction results in smooth rotation, rotating it in the other direction feels like it is passing a magnet with the required torque to rotate varying.

Read More
hzmeyer -
October 21, 2012
See more answers