Model #338179370 CRAFTSMAN Wet/Dry Vacuum

  • 8 Gallon Wet/dry Vac
    3 Results
Find part by diagram >

Question and Answers

Q:

Part number/size for this unit's hose? 338179370 Craftsman 8 gallon wet/dry vac

A:

Thank you for choosing sears I would be happy to help you with your wet/dry vacuum. Upon researching model 338179370;  the hose is part #90503-00,  size: 2.5 x8 ft and is compatible with roto-lok system. I have posted a link below were you can order this hose.

 

 I trust that this information will help you, thank you have a great day.

           

 

                                                                                    

Read More
Jeff Wallace Jr -
Sears Technician
December 23, 2014
A:

Thanks! Exactly what I was looking for.

Read More
Katie -
December 23, 2014
See more answers
Q:

what part holds the filter on 338179370 Craftsman 8 gallon wet/dry vac

A:

When it comes to needing parts for your tool Sears Parts Direct website is the place to visit. I have attached the link below so you can speak with a Sears associate to find out what part is needed. Hope this helps!

Read More
Dezeray -
October 09, 2012
A:

I know that it can be very frustrating when parts don't want to stay in place. On this model the filter (key #10 in the image below) will fit over the foam sleeve (#9) which connects onto the lid and cage assembly (#8). If the foam sleeve or the lid and cage assembly is damage or missing, the filter will not stay in place. If you need to order new parts, just click on this link to do so: Sears Parts Direct . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 09, 2012
See more answers
Q:

Craftsman shop vac quit working

A:

I'm sorry to hear that you are having some difficulties with your vacuum. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope this link provided assist you.

Read More
Jackie S -
December 26, 2011
A:

I suggest you disconnect the power to the vacuum, remove the motor unit from the vacuum and disassemble the motor from the power unit. Check the impeller for blockage.

Test the switch with an ohm meter. If the motor is getting power and is not running, you should consider replacing the shop vac. You can go to Sears.com to compare features and prices.

Read More
Jimmy K -
Sears Technician
December 27, 2011
See more answers

Top Parts