Model #336 BROAN Vent Systems (Downdraft)

  • Blower Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

oven will not come on FEF336FMC Frigidaire Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model FEF336FMC; you can unplug the range power cord and remove the heating element and the oven temperature probe when the oven is not hot. With the parts removed you can test the parts for continuity using a multi meter, if any of the two parts test reads no continuity then that part may need to be replaced. If both of the parts test reads continuity then you may need to replace the electronic control board.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 28, 2015
A:

My issue is that the display still works ok & the range works ok, but the oven & broiler don't heat at all. They worked ok yesterday & now all of a sudden they just don't heat. Power is on to the appliance. I've read it could be a thermal fuse? If it is, what is the part number I need for model fef336fmc. Thank you!

Read More
Tim -
September 15, 2015
See more answers
Q:

Oven not heating FEF336FMC Frigidaire Electric range

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your range will not heat. 


1. Check resistance at room temperature and compare to RTD sensor resistance chart. If resistance does not match the chart, replace RTD sensor probe.
2. Check resistance at room temperature, if less than 500 ohms, replace RTD sensor probe.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 08, 2015
A:
Natasha12 -
Sears Technician
July 08, 2015
See more answers
Q:

Why does the tractor jump forward when depressing the forward pedal? 3360510 Hydro Gear Hydro gear transaxle

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your mower is not working properly.

I did look into the issue and I have found information that will assist you in checking the parts on your mower.

Click here to view the information.
 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 


Read More
Natasha12 -
Sears Technician
May 22, 2015