Model #32LA30RQ RCA LCD Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

RCA TV 32LA30RQ subtitles too low on screen to read

A:

I did some research on the RCA and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
May 30, 2013
A:

check to see if you have the picture enlarged. there is a feature on the TV for zooming out the pic. to make it larger but it will cut off the subtitles and the channels logo usually on the bottom right corner. Look on the remote it will usually will say pic. size or pic. format if you have a cable or sat. box there is usually the same on those remotes as well.

Read More
TC -
May 30, 2013
See more answers
Q:

My RCA television just cut off and will not power back on.

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
January 04, 2013
A:

Hello Kristin,

Note: Working on a TV can be difficult and dangerous due to the high voltage circuits inside. Always remember to unplug any TV before trying to service it and if unsure of the proper procedures, seek the service of a trained professional.

I'm sorry to hear that your television has shut down and will not turn on again. Issues like the one that you have described can be caused by several things, the power supply and the main circuit boards are the two likely suspects. I recommend contacting a local television repair service or following this link: Sears Home Services to arrange a repair with a Sears technician.

Please let me know if there is anything further that I may assist you with.

Jerry C

Read More
Jerry C -
Sears Technician
January 07, 2013
See more answers
Q:

i have a 32inch rca tv model#32la30rq my remote control will only turn tv on and off and tv buttons will not operate it is stuck on one channel is there a code?

A:

The remote not working can be frustrating. I found some information for you that I am hoping will be able to assist you. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that everything works out on the television.

Read More
Marc -
December 31, 2012
A:

could setting garage door remote interfere with the television?

Read More
anthony -
December 31, 2012
A:

Hello Anthony,

Note: Working on a TV can be difficult and dangerous due to the high voltage circuits inside. Always remember to unplug any TV before trying to service it and if unsure of the proper procedures, seek the service of a trained professional.

I'm sorry to hear that your television is malfunctioning and I would like to assist you. The usual cause of an issue like this is the failure of the keypad circuit board in the television. It will require the disassembly of the television and the replacement of the keypad circuit board that plugs into the main board. The disassembly of the television is difficult and damage to the set can occur. I suggest contacting a local television service company or visiting this link: Sears Home Services to arrange a repair with a Sears television technician.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
January 02, 2013
See more answers

Top Parts

Top Accessories