Model #32026302 CRAFTSMAN Drill Driver

  • Drill
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacement trigger switch 32026302 Craftsman Drill

A:

The extra wire leads on that switch don't need to be connected on your drill. The original replacement part that exactly matches your original switch is no longer available. The substitute part that you received should fit in your drill. It should also work properly when connected as you original switch was connected. The extra wire leads power a small control board that is used on a similar drill that has additional features. Just ignore the extra wire leads.

I hope that this information helps.

If you need additional assistance, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
July 10, 2015
Q:

trigger switch for cordless drill

A:

When a tool is broken, the Managemylife web site is a good resource to find out what may be happening and what options you may have. I'm sorry to hear about the difficulties your having with your Drill repair. I did some research for you at Managemylife.com and found an expert answer to a similar question that I hope will help until your expert can answer your specific question. I attached the link below. I hope the provided information is useful to you.

Read More
James -
August 31, 2011
A:

I am researching this with the manufacturer. I hope to have an answer for you soon.

Thank you for your patience.

Sam A.

Read More
Sam A -
Sears Technician
September 02, 2011
A:

Was an answer ever found? I recently ordered the same part. The trigger has the same extra two wires attached. Not sure what to do with them.

Read More
Rick -
July 06, 2015
See more answers
Q:

Where can I get a new battery for this drill? 32026302 Craftsman Drill

A:

Thank you for Choosing SearsPartsDirect.com. I defiantly understand the frustration with not being able to find the correct battery. I will be more then happy to assist you.

Looking at the information for Craftsman drill model 320.26302, the correct battery is a 20v. Part number is 2770110000. Normally I recommend replacing the charger as well, that part number is 0800107000. You can click here for more information on that battery pack.

Hope this information has help you, any future questions or concerns please feel free to comment back, thanks.


 

Read More
Samantha A -
Sears Technician
May 13, 2014

Top Parts