Model #32017255 CRAFTSMAN Saw Sabre

  • Saw
    3 Results
Find part by diagram >

Question and Answers


Sabre saw blade removal


I am sorry that you are having some difficulties with your scroll saw and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your saw troubles while you wait for your expert response.

Read More
Joseph P. -
July 31, 2012

Thank you for your question on the jamming of the blade in the sabre saw blade holder.

With the saw upside down remove the chip shield for better access to the blade. There may be a burr on the top of the blade that is holding it from easy removal.

Move the guide roller away from the blade by rotating the cut type lever.

When you rotate the tool-less blade lock is the blade loose at all? If it is then you should be able to use a pair of pliers to pinch the blade and pry up against the holder to remove the blade.

If you cannot get the blade holder to turn, then push down on the blade to see if it will release from the tool-less holder lock.

Please let me know how it went.

Sam A.

Read More
Sam A -
Sears Technician
August 01, 2012
See more answers