Model #316790110 CRAFTSMAN Line Trimmer/Weedwacker/Brushwacker

  • Engine
    3 Results
  • Lower Boom
    3 Results
Find part by diagram >

Question and Answers

Q:

Gasoline Oil Additive

A:

Proper lubrication and oil in small engines is essential to keeping them running the entire season. I located a great video and article right here at Manage My Life that may help while you wait for the expert to review and respond. I attached the links below. I hope this information helps you get ready to tackle the yard work.

Read More
Barbara H. -
March 29, 2012
A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you have submitted. The new blower needs synthetic oil but the old trimmer does not. If you only want to use one gas can, I recommend using only the synthetic mix. It will be fine to use in the in the older trimmer also.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 30, 2012
A:

MIKE J., April 7,2013: May be my problem. Thanks, cause I used stihl oil in the blower. I'll drain and replace!

Read More
michael -
April 07, 2013
A:

michael, Please let me know if this does not cure the problem. I will be happy to assist you. Thanks Mark

Read More
Mark T -
Sears Technician
April 11, 2013
See more answers
Q:

tyring to figure out were fuel lines go on trimmer

A:

Having the right information on installation of fuel lines is very important. I came upon some information that can be very helpful. I have attached the links below. Hope they help you.

Read More
maira -
June 03, 2012
A:

Thank you for your question.

I am sorry; we do not have written instructions for the routing of the fuel lines on your product. Our technicians are thought the basic routing because the routing cannot change much from year to year. If you have one large fuel line and one smaller this eliminates some chance for error. If you have 2 small fuel lines to the carburetor connect them and start the engine. Reversing the fuel lines will not prevent the engine from starting. If you have them connected backwards, the engine will start and die. Reverse them and you will be correct.

The routing of the fuel lines vary from model to model. Keep in mind that the primer bulb circulates fuel from the tank, through the carburetor, and back into the fuel tank. One line goes from the fuel tank to the carburetor. One line goes from the fuel tank to the primer bulb, from the primer bulb to the carburetor, and back to the fuel tank. The small line in the fuel tank should have the filter attached to it. I have added a sketch below of how the fuel should flow in the circuit.

I have found a video I think will be useful. Please click here to watch a video on how the fuel lines are routed. If you need further assistance, please submit more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 05, 2012
See more answers
Q:

Why is Part No Longer Available?

A:

I'm sorry about the difficulties your having finding parts for your Craftsman Bushwacker. I did some research for you at Managemylife.com and found an expert answer to a similar question that I hope will help until your expert can answer your specific question. I attached the link below. I hope the provided information is useful to you. If there is a place to find a replacement your expert will know. Managemylife expert really do know there stuff.

Read More
James -
June 14, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the trimmer. I have looked up the model number for the trimmer. I have confirmed the cutting head is no longer available. I have looked around and found a model that uses the same gearbox so the cutting head should attach. The model number is 316790110. The complete cutter head is part number 791-147498 and can be ordered from our parts website: Sears Parts Direct .

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 15, 2011
A:

Thanks Mar T. This info is very helpful. The head you suggested pn 791-147498 seems to be an automatic line dispencing head. I prefer a single line head. I'll keep looking around and if I didn't find one, I'll consider your suggestion.

Read More
Ivan -
June 17, 2011
See more answers