Model #31522401 CRAFTSMAN Sander

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Can I get specifications of a Screw Part #: 1-621431-06 that has been discontinued? Thank you for your interest and consideration. 31522401 Craftsman Dual - motion sander

Q:

Vintage Craftsman Dual-Motion Industrial sander maintenance 31522401 Craftsman Dual - motion sander

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The two big maintenance items would be the belt and the motor brushes. Both of which have since been discontinued, but should still be available through aftermarket sources online or locally. 
Motor brushes are offered online, usually based on thier size. The same would hold true for the belt, it would be based upon the belt width and length. You could always run internet searches for the part numbers to see if there are any still in circulation. The belt is part number 622393-001, and the motor brush is 730352-003. 
Outside of those commonly replaced parts, cleaning the unit periodically will go a long way. Make sure there isn't any saw dust accumulation and occasionally blow it off with compressed air or clean it the best you can. 
Outside of that, the unit will need very little service. Hope these suggestions help and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 05, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The two big maintenance items would be the belt and the motor brushes. Both of which have since been discontinued, but should still be available through aftermarket sources online or locally. 
Motor brushes are offered online, usually based on their size. The same would hold true for the belt, it would be based upon the belt width and length. You could always run internet searches for the part numbers to see if there are any still in circulation. The belt is part number 622393-001, and the motor brush is 730352-003. 
Outside of those commonly replaced parts, cleaning the unit periodically will go a long way. Make sure there isn't any saw dust accumulation and occasionally blow it off with compressed air or clean it the best you can. 
Outside of that, the unit will need very little service. Hope these suggestions help and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 05, 2014
See more answers