Model #315212010 CRAFTSMAN Miter Saw

  • Table Assy
    3 Results
  • Base Assy
    3 Results
  • Pivot Assy
    3 Results
  • Gear Case Assy
    3 Results
  • Upper Guard Assy
    3 Results
  • Dust Collector Assy
    3 Results
  • Motor Assy 1
    3 Results
  • Motor Assy 2
    3 Results
Find part by diagram >

Question and Answers

Q:

10 inch compound miter saw problems

A:

The expert will be able to help with the miter saw blade troubleshooting. While you wait, I attached the online owner's manual if needed and the Sears Parts Direct site if parts are needed. I hope these help.

Read More
Barbara -
December 15, 2012
A:

Thank you for your question on the miter blade not turning.

This model has a drive belt from the motor to the blade arbor.

The first I would suggest you do is to remove the 4 screws on the oblong side cover for the drive belt to see if that is the reason for the problem.

If it is then you will need to replace the drive belt.

Drive belt for miter saw model 315.212010 .

Please let me know what you found out about the belt and if that is not the problem then please respond and we can continue to troubleshoot with that information.

Sam A.

Read More
Sam A -
Sears Technician
December 18, 2012
See more answers
Q:

bevel scale

A:

I know how important it is to have detailed information about your saw to make sure you are using it properly. I did some research and I was able to find the owners manual for your saw. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
May 23, 2012
A:

Thank you for you question on the bevel scale on the sliding compound miter saw.

I sorry but I do not see the range marked on the label as "1/2".

The bevel scale indicator is set in degrees of angle from 0 to 45 degrees. With larger line markings at the most common settings for cutting molding.

Page 30 of the manual has the scale chart to set the saw to for different bevels and angles.

Page 31 of the manual is referring to cutting crown molding and how to set the saw miter and bevel when cutting this molding.

I hope this information will help.

Sam A.

Read More
Sam A -
Sears Technician
May 25, 2012
See more answers
Q:

Craftsman miter saw # 315.212010

A:

An issue has been identified in Internet Explorer 9 that prevents the proper viewing of PDF documents such as owners� manuals on Manage My Life. We recommend using another browser such as Chrome or Firefox to access owners� manuals. If you are still unable to view your manual in these browsers please let me know here and we will find an alternative way to deliver your manual to you. I apologize for the inconvenience. As always, we are here for you if you have any additional questions.

Read More
Jackie S -
May 23, 2011
A:

Thank you for your question.

I can understand wanting to have the owner's manual for the miter saw.

I have e-mailed you the manual for the saw.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
May 24, 2011
See more answers