Model #315115200 CRAFTSMAN Drill Driver

  • Drill
    3 Results
  • Housing Assy
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

battery charger 315115200 Craftsman Drill-driver

A:

Thanks for contacting ManageMyLife.com. I understand your concern with locating a battery charger for the drill. We are here to help. The battery charger for the drill is no longer available. However, if the battery base is still good, you may be able to repair the charger. You would need a transformer that has the same exact voltage and ampere output. Also, you may be able to go to a place call Batteries Plus for a charger. They may be able to make a charger for the drill. I hope this helps.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.
 

Read More
John H -
Sears Technician
September 09, 2013
Q:

Troubleshooting battery charger Cordless drill model 315.115200

A:

I can understand your dilemma regarding which part might have failed. I would suggest that you visit the website Sears Parts Direct.com. I placed a link below that will bring your drill up for you to review the parts. Just click on that link and within 10 seconds a box will open inviting you to chat with an associate who will be happy to help you locate and order whatever parts you need. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information. I hope this link will enable you to address and complete the task before you and have a nice day.

Read More
Henry -
December 30, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the drill. I will be happy to assist you. If you have a meter, you can check the voltage output of the charger. First, turn the meter to check DC voltage. Then plug the charger in and place the meter leads on the two metal connectors in the charger. You should have a reading of at least 14 volts. If you have this reading, I recommend replacing the battery. If you do not have this reading, the charger is defective. I looked up and charger and found it is no longer available. Even if the charger was available I recommend looiing into purchasing a new drill. The reason is because the age of the battery. The cost to replace the charger and the battery would exceed the cost of a new drill. If you are interested in a new drill, click here to see the ones we offer. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 02, 2013
See more answers
Q:

cordless drill charger

A:

To better help your expert with the drill and charger more information would be very helpful. it normally takes about about 24-48 hours for your expert to respond. I do hope that everything works out with the drill and charger.

Read More
Marc -
August 19, 2012
A:

Thank you for your question on the craftsman drill charger.

Is there some specific question that you have?

I see that this charger is no longer available. If you are looking for one I have found a replacement 13.2 Craftsman charger on line | http://www.amazon.com/Craftsman-9-11379-Battery-Charger/dp/B000P8VSUI/ref=sr_1_1?ie=UTF8&qid=1345575490&sr=8-1&keywords=13.2+ryobi+battery+charger] .

Please take a look at the link above to see if that will work for you.

Sam A.

Read More
Sam A -
Sears Technician
August 21, 2012
See more answers