Model #315115033 CRAFTSMAN Sander

  • Outside Parts
    3 Results
  • Inside Parts
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

CAN I TAKE OFF RUBBER DEAL ON CRAFTSMAN BUFFER MODEL NUMBER 315.115033 AND PUT SCREW ON TYPE

A:

I know how important it is to have detailed information about your sander before doing repairs. I suggest you keep the original parts for the sander to keep it running strong. I am adding a link below in where you can enter the model number of your sander and a parts list diagram will pop up if you need to order a part. The expert will respond within 24 to 48 hours and provide you with some more specific information.

Read More
Joseph P. -
May 19, 2012
A:

Hi Trent,

Thank you for submitting a question to Manage My Life.

There is not a backing plate made for this buffer. The backing plates are heavy and are designed for sanding. This is a low amperage sander/polisher that shouldn't be used as a grinder or heavy sander. You may be able to find one that fits, but I do not recommend using one with this buffer.

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
May 21, 2012
See more answers

Top Parts