Model #315111260 CRAFTSMAN Screwdriver Cordless

  • Craftsman Cordless Mini Driver
    3 Results
Find part by diagram >

Question and Answers

Q:

Voltage for very old Craftsmen drill

A:

I understand that you want to know the voltage to your Craftsman drill. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
April 10, 2012
A:

Thanks for the quick response, Alina. When I went to your link it was looking for the voltage of a 315.111860, not a 260. Would they be the same? I would hate to use too high a voltage to charge it. I know that the part number for my drill is now being used for an electric screwdriver so that doesn't help me. This drill is a small 300/600 rpm 2 speed drill and I've had it for decades. My wife likes it because of the small size & weight.

Read More
Dick -
April 10, 2012
A:

Thank you for your question and I understand your concern.

According to the model number provided it is a Cordless Screwdriver and the charging voltage is 2.4 volts.

I added a link to the Owner's Manual with the specifications.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 10, 2012
A:

Thanks Joey, but the drill I have is not the cordless screwdriver that comes up when you enter the part number that is on my drill. The drill is, as I said, very old and apparently Sears is reusing the model number for the cordless screwdriver. The charger number is 999555-004 but is no longer available. Mine is a very small, 2-speed, reversible, cordless drill 300/600 rpm. It doesn't have the voltage printed on the drill label. Dick

Read More
Dick -
April 10, 2012
A:

Dick: I could not locate the voltage for your model drill. We do not have any specifications of the voltage. It appears the Owner's Manual is available but we do not have a copy to look up any specifications. The part number of the manual is # 612547-582 . The only other suggestion is to look on the charger once you locate it. Were thinking it could be a 7.2 vdc or order the manual and it should state the voltage.

Read More
Joey S -
Sears Technician
April 11, 2012
A:

Thanks, Joey. I don' really want to pay 4.99 + shipping for the manual (I'm cheap.) It's more than the drill is worth. I have been playing with the voltage on the universal charger, starting at the lowest and moving up if it doesn't provide a sufficient charge. I am sure I will eventually find the original charger. It was probably placed somewhere so my wife would know where it is. Thanks, Dick

Read More
Dick -
April 11, 2012
See more answers
Q:

My Cherished Cordless Drill Model No 315111260

A:

I'm sorry your morning isn't off to a great start. Manage My Life is a great website and the experts really do love to help. They will be able to provide you with the information needed. It usually takes 24-48 hours to receive a response. Again, I am truly sorry for your rough morning but you will be sure to get the answer you desire from an expert. Happy Sunday!

Read More
Jackie S -
June 19, 2011
A:

Thank you very much Jackie S you are very kind. I guess us old geezers can get fiesty sometime when thing become outrageously complex for such an easy replacement part. Yes my drill might be an oldie but goldie but it has server me so well that I just hate to part with it. It still works so well but the charger just peetered out on me for some unknown reason. So, anyone who can help an old geezer out would be greatly appreciated. Thanks again. :)

Read More
ScorpioRich50 -
June 19, 2011
A:

Thank you for your question.

I can understand your frustration on finding the correct charger and battery replacements.

For the 315.111260 drill driver the part number for the charger is: 9-11021 and the battery is as slide in with a part number:9-11119.

It looks like they used the model number over again and the 1987 model drill driver has a wall plug type charger. The battery is internal on this old model and not replaceable and the charger part number 9-11081 is no longer available.

The part number of 999555-004 is for a 315.11134 drill driver and it has a replaceable battery pack part number 967156-001 and you have to spilt the case and un-solder the wires and solder in the new battery pack on this one. This 999555-004 charger is no longer available.

I hope I got all that straight.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 21, 2011
A:

Thank you Sam A for your expert answer. Well looks like I will be parting with my precious 315.11260 drill that I have enjoyed for many years. I am not an electronic technician to open this drill up, unsolder the old battery and resolder the new one in. It is just SO FREAKIN horrendous that last Sunday I was on the phone with the parts replacement office and they are now sending me a replacement battery 9-11119, so I presume they will be AGAIN giving me a credit for something that REALLY does not work for me. Unless of course I misunsderstood you information wrt 9-11119 above. Boy it is tough to get old....ya know... Thanks again Sam

Read More
ScorpioRich50 -
June 21, 2011
A:

If you can see my picture, I do understand about getting old and trying to write coherent sentences. Good luck with the soldering of the battery. My question is how are your going to charge the battery if the charger is not longer available. Did you find a substitute? I got thinking that if you take it to a Radio Shack you might be able to match the terminal and + and - connections and the voltage so you can continue being able to use it. Sam A.

Read More
Sam A -
Sears Technician
June 21, 2011
A:

Richard - I hope this message doesn't get to you late. I too have a Craftsman 315.111.260 cordless drill. The drill itself i think has died - but I think the charger 999555-004 still works. If your interested in it - I could sell it to cheap. We could do on Ebay, for protection of both of us. Let me know what you think. Thanks

Read More
vern -
November 23, 2011
A:

Hello Vern - I was having some issues loggin into this site yesterday and updating my profile, etc. I would like to thank you very much for your generous offer and utmost consideration for your cordless charger. I am not a big ebay user but I do have an account and do have paypal as well. So, please let me know about how much you are talkin about selling you charger for and then we can see if it will be worth my while to connect up with you to perform that transaction. Much thanks again for you offer, Vern

Read More
ScorpioRich50 -
November 25, 2011
See more answers