Model #315108241 CRAFTSMAN Saw Circular

  • Base And Blade Assembly
    3 Results
  • Motor Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

circular saw problem

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
December 12, 2011
A:

Thank you for your question on the Craftsman circular saw running sporadically.

The most likely cause for this problem with an older saw is the switch and or the brushes on the motor.

You can remove the brushes from the black brush caps on the side of the motor to see if they are badly worn or burnt.

If you have to click the switch several times to get it to come on it will be a bad switch.

If the saw cuts out while you are cutting I would say it is a problem with the brushes.

Please let me know what you find out.

The switch is no longer available but the brushes you can still get.

Sam A.

Read More
Sam A -
Sears Technician
December 14, 2011
See more answers
Q:

Is it worth fixing a Sears circular saw model 315108241 that a small ball bearing fell out of it?

A:

I have checked and some of the parts are available but the armature assembly is not. I am afraid the saw is non repairable. Here is a link so you can shop for a new saw from the comfort of your home. Sears

Read More
Mark T Personal Solutions Manager -
Sears Technician
December 09, 2009
Q:

I have a 7 1/4 circular saw and cant get the tee nut loose the shaft keeps turning. What do I do?

A:

I am not sure what you mean by "the tee nut".

If you are trying to remove the blade bolt to replace a blade, put a large nail or screw in a tooth of the blade and let it jam against the bottom of the saw.

If this is not the information you needed, send another email and give us some more details of what you are trying to loosen.

Read More
Jimmy K -
Sears Technician
September 04, 2009

Top Parts