Model #31211XAW MAGIC CHEF Range (gas)

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Gas Controls
    3 Results
  • Door/drawer
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Gas range conversion to LP

A:

I'm sorry to hear that you are having some difficulties with your Range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope the link provided assist you.

Read More
Priscilla V -
October 19, 2011
A:

That is correct, there are no parts needed to convert the range to LP.

Along with flipping the gas pressure regulator cap over you must also turn each one of the surface burner valve spuds on each burner valve clockwise (CW) in order to reduce the amount of gas flowing through the valve. You must also do the same to the oven safety valve spud. You need to tighten it down until the spud bottoms out. Then you will need to adjust the air shutters for each surface burner valve and the oven burner air shutter until you get the best burning flame.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
October 19, 2011
See more answers