Model #31203 LXI Direct View\Digital 27" to 40" TV

  • Cabinet
    3 Results
Find part by diagram >

Question and Answers

Q:

Problem with oven lighting Magic Chef Gas Oven 31203PAV

A:

I can see how upsetting this would be. While you are waiting for the expert, you might check the link below for some help. If you decide to schedule service, the Sears Home Services link below can help.

Read More
Barbara -
January 06, 2013
A:

That type of failure is usually caused by a weak igniter. Here is a link for a brief video that explains the ignition process in that oven: Gas Ignition Operation . Since the oven lights on the first attempt, this usually indicates that the oven safety valve is probably okay. You will probably need to replace the igniter to fix this problem. If you want to fix the oven yourself, you can order a new igniter from this page: Igniter Kit for Magic Chef Gas Range Model 3120PAV . Be sure that you unplug the range before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 08, 2013
A:

How can you remove the old range burner assembly? It's tied up can't be removed by hand as video shown on youtube

Read More
Jansen -
March 20, 2015
See more answers
Q:

Why is my Magic Chef oven not maintaining baking temperature.

A:

Thank you for your question and I understand your concern.

The problem with the oven not maintaining temperature is most likely the oven glow bar igniter. The oven igniter must pull enough current/amperage (3.2-3.6 amps) to open the oven gas valve and to keep it open. Open the broiler drawer and watch the oven glow bar igniter. When you find the temperature dropping, if the glow bar igniter is glowing and has been glowing for 60 seconds are longer without the burner ignition, replace the glow bar igniter and your oven will most likely maintain the temperature and the burner will most likely ignite a lot faster.

The oven igniter part #12400035 for the Magic Chef gas range model 31203KAW can be ordered from Searspartsdirect.com 

The oven burner igniter can be accessed and replaced by removing the oven floor. NOTE: Disconnect the power cord from the power source before servicing. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
September 12, 2013
Q:

Gas Magic Chef 31203KAW Oven no spark

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
August 02, 2011
A:

The amp draw on your ignitor should be 3.4-3.6. If your ignitor is not glowing, measure the voltage to the ignitor. If you have 120 volts ac, the ignitor is bad.

Read More
Jimmy K -
Sears Technician
August 04, 2011
See more answers

Top Accessories