Model #311707-0132-E1 BRIGGS & STRATTON Engine

  • Cylinder Assembly
    3 Results
  • Engine Sump Assembly
    3 Results
  • Carburetor Assembly
    3 Results
  • Starter Motor Assembly
    3 Results
  • Blower Housing And Flywheel Assembly
    3 Results
  • Gasket Set
    3 Results
Find part by diagram >

Question and Answers

Q:

1.What happens when the breather goes bad? 2.How is the compression unloaded when starting? 311707-0132-e1

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your engine. Upon researching model number311707-0132-e1; the air breather allows air to flow into the unit to get the proper air to fuel mixture. The engine will run poorly if air is restricted. Compression is unloaded through the exhaust.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 17, 2014
A:

Where can I find an answer to this question?

Read More
Mary -
December 17, 2014
See more answers
Q:

starter help 917270722 Craftsman Tractor

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your mower and do understand your frustration. Glad to help out. Im looking at your model number 917270722 and egine model 311707-0132-E1 If the starter is spinning but not engaging the flywheel, I suspect the starter gear is stuck down. To repair this you will need to remove the starter. The starter is secured with two bolts. Once the starter is removed, Turn the gear and try to work it loose. Once it comes loose, spray the drive with WD-40. As soon as you feel confident it is freed up, go ahead and reinstall the starter.  

Read More
Sherman_G_Wallace -
Sears Technician
April 29, 2014
A:

Hi, the starter is spinning and coming up its just not hitting the flywheel even when I pull the starter up it doesn't come in contact with the flywheel.

Read More
sean -
April 29, 2014
A:

The model number you have is not mine , 502.249361 --- 1924067 not sure which one is the model number.

Read More
sean -
April 29, 2014
A:

Thank you for the additional information and the model number 917270722 is the one that is listed in your question. 311707-0132-E1 is the model number for the engine the tractor uses. It is possible that the starter or gear needs replacing. Also take a look at the flywheel and make sure it is in place. If you have further questions please resubmit your question for further information.

 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
April 29, 2014
A:

502.249361 is the model number for the grass catcher.

Read More
Sherman_G_Wallace -
Sears Technician
April 29, 2014
A:

Sherman; I have the model 311707-0132-E1. I have replaced the starter solenoid switch, and the starter. The starter will not spin fast enough to make the pinion come up and lock. Is the shaft supposed to spin clockwise or counter clockwise? I have also replace the battery with the one from my John Deere Rider. So, it is known good. The shaft barely turns (sometimes) when I turn the ignition switch. Other times the solenoid just clicks.?????

Read More
David -
June 29, 2014
A:

It sounds like the battery does not have enough cranking power.

Read More
Sherman_G_Wallace -
Sears Technician
July 03, 2014
See more answers
Q:

starting model 311707 - 0132-E1 311707-0132-E1 Briggs&stratton Engine

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. Sounds like it could be either the safety switch on the seat of the tractor, or the ignition. Something here isn't letting the circuit get to the starter, or not enough of it to turn over. I would recommend to replace both the ignition and the seat safety switch. Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
June 24, 2014