Model #3101 CRAFTSMAN Screwdriver Rachet

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Fuel tank for Mod.# 636.796911 636796911 Craftsman Craftsman 37.7 cc gas power blower

A:

Thanks for the inquiry and for being a valued member.

The fuel tank part FL40-3101A (sub 6613500000) has since been discontinued with no further substitutions offered. You can try Google searching either of the part numbers to find one in circulation, but that would be the only foreseeable option. 

We apologize for the inconvenience and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 07, 2015
Q:

Gas cooktop blew circuit breaker, now makes popping noises, 790.3101

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

The only thing that I could see going bad under that stove top would be the ignitor switch wire harness. That part is the only thing electrical under there, that I could see going out.

What I would recommend is cleaning under the cook top and putting maybe a fan close to it, blowing on the burner and ignitor area. This way you can dry everything up and see how it will perform, and also go from there. 

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
April 25, 2015
Q:

Igniter problems with my Kenmore Pro Gas Cooktop model 790.3101

A:

I know how disappointing it is when your stove begins to malfunction. I researched your question and was able to find a couple links regarding the front burner that is not igniting. I attached both links below. i hope this helps.

Read More
Jackie S -
February 24, 2012
A:

Could I get a part number for the burner switch they are talking about? Thanks

Read More
Jeff -
February 24, 2012
A:

The igniter switch on that burner valve is probably the cause of your ignition failure based on these current details. That igniter switch is part of an assembly that includes all of the igniter switches and the wiring harness. It is shown as Key 3 in the parts image that I provided below. I am not aware of the burner switch being sold separately (another instance of overkill). The part number for the igniter switch assembly for full Kenmore Pro Gas Cooktop model 790.31013600 is 318232612. You can order that part from the Sears PartsDirect website. Here is a direct link for that part: Wiring Harness . The description of that part on the parts website says "Wire Harness" but it includes the wire harness and all of the burner switches as shown in the image that I provided below.

Be sure that you shut off the house circuit breaker to disconnect electrical power before accessing internal components.

Replacing that component should fix your problem. If you need more help, reply with additional details.

If you get to the point where you need to have a service technician complete this repair, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 08, 2012
A:

Can you provide me with instructions on how to replace this part? It seems like the whole top of the stove would need to come off the counter right?

Read More
Jeff -
March 08, 2012
A:

You will need to pull the cook top out of the counter and remove the bottom burner box to access those burner switches. Unplug the cook top and shut off the gas supply before beginning this repair. You can use the information in the installation instructions as a guide when pulling that cook top out of the counter. I provided a link for that instruction guide below this response. Reverse the installation process provided in that guide to remove the cook top from the counter. You should find screws on the burner box under the cook top that attach the burner box to the cook top. After removing that burner box, you can access the burner valves and replace those burner switches. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
March 08, 2012
See more answers