Model #30-3882-23-01 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Burner Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Cooktop And Drawer Parts
    3 Results
  • Door Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

I need to replace left & right front burner tubes Tappen/Frigidare Gas Range Model No 30 3882 23/01- having a problem disconnecting tubes on bottom end

A:

Hi, I see you need to replace the tubes. You can visit ManageMyLife.com website click on Manuals put in model number. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 20, 2010
A:

Lift off the burner caps to access the screws holding the burners in place & the top down. Use a putty knife to release the spring clips between the top & front panel, usually 3-4 inches from the outer edges. Lift the top up & block with a wooded dowel. Once you get the top up you can remove the burners to access the burner tube threaded connectors. Please see the image provided below. Remember to disconnect power before attempting repairs.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
July 22, 2010
See more answers