Model #3002 AUDIOVOX Speakers

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

DLG4802W Gas Dryer Burner is not lighting (What else should I look at? I am at a loss.) DLG4802W

A:

I have replace the flow sensor and thermostat that I ordered and still not getting the burners to light. I have no idea what to try next.. I have litterly replace every sensor almost except for the sensor that makes sure the ignitor is working.. Since it detects the ignitor and able to shut it back off when it is mounted and when unmounted the ignitor stays on.. so I did not replace that. I think the only thing left is the pcm, but that is a bit of money to buy, just to see if it is the mother board or not. Please give me a direction to go. This is getting very frustrating. What ever the problem is, it is not sending any kind of current to the gas valve cylinoids. If I knew for sure what the voltage needed to energize the cylinoids, I would manually energize them and make sure they are even working. I believe its 110v but am not sure.

Read More
Steven -
October 20, 2015
A:

Bumb for an answer. Still have not got this dryer running yet.. I think the only thing left to try is to replace the Main pcb assembly Part #: EBR71725802.. But I would like to have an answer before I spend $190 on something that may not be the problem. Thank you

Read More
Steven -
November 08, 2015
See more answers
Q:

2005 6.5 hp APG 3002 APG3002

A:

Thanks for the inquiry and for being a valued member.

I show the breather tube for the APG3002 model as OEM part number APG3002D-A-08-JD, which is different than the part number for the newer unit. The original breather tube for APG3002 has been discontinued with no direct substitute. 

You can try using APG3012-A-08-JD, but we cannot guarantee it will be a direct fit, as All Power America has not substituted the part. It sounds like your best option though. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 10, 2015
Q:

Why do the door cams break?

A:

The purpose of the cams is to help keep the doors closed. The cams can be replaced separately from the door gasket but if the gasket frame is damaged then the complete gasket will need to be replaced. Most of the time only the cam will need to be replaced. The cams have been upgraded and are now improved. Left side: 4430JJ2004B and Right side: 4430JJ2004A. These cams can be ordered at sears parts direct. This is not improperly assembled or a bad design. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
A:

I've got the same issue with my Kenmore refrigerator model: 79571306010 and part number: ap4440023. It seems to me that there must be a manufacture problem with the "gasket frame" or "gasket" because both doors have the same problem. I just received the gasket replacement for the right side. Before I could install it the left one broke too. The cams are just fine - its the thing they attach too that's weak in my opinion. please advise what I should do. Thanks

Read More
Terry -
September 02, 2012
A:

This is a bad design, I now have to replace my light sockets because they heated due to the door not shutting properly. Really sad there has been no response to this problem. Very disappointed.

Read More
Laura -
May 21, 2015
See more answers