Model #3000 DIRT DEVIL Vacuum, Upright

  • Assembly Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Craftsman Lawn tractor YTS 3000 Model 917.289240 with a 21hp Brigss and stratton engine. It starts but Stalls out and sometimes sputters before

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina -
June 01, 2013
A:

check the gas cap vent. the cap has a vent to let air into the tank as the gas comes out if the vent is clogged the tank can't get any air to replace the gas and will actually stop the flow of gas from coming out the fuel line. you can run it with the cap loose just setting on the tank with 1 turn so it is not tight and see how it runs

Read More
TC -
June 01, 2013
A:

I checked the Gas cap and no change. I did however notice that when I set the throttle to low, it sputters along. When I increase the throttle, it stalls.

Read More
tgeorgia -
June 02, 2013
A:

Ended up removing carburator and cleaning it up. Runs good now.

Read More
tgeorgia -
June 02, 2013
A:

I see you've already gotten this problem taken care of. I'm glad you have it figured out. If we can be of any further assistance, please stop back by and let us know.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
June 05, 2013
A:

i cant believe you said "if we can be of any further assistance, please stop back by and let us know " ,you were no help to them at all

Read More
howard -
January 30, 2016
See more answers
Q:

How much does my Craftsman Lawn Tractor weigh?

A:

You pose an interesting question.  I would suggest calling the Sears Craftsman Help Line at 1-800-659-5917.  I figure it should weigh just about 500 lbs.  I will forward your question to an expert who will investigate the matter further and get back to you.
You will hear from them within two business days if not sooner.
Until you hear from us, have a nice day.

Read More
Henry -
May 07, 2013
A:

The craftsman help line did not know and gave me this web site.

Read More
Rich -
May 07, 2013
A:

Shipping weight is listed in Specifications and Dimensions section on the product page of Sears.com. For example, the YT3000 Model 28851 is 555 lbs. and the GT6000 Model 28861 is 596 lbs.

Read More
ToolBoxHero -
May 07, 2013
A:

Your 917.27660 is about the same tractor as the YT3000 so I would gues around 520 lbs without gas.

Read More
ToolBoxHero -
May 07, 2013
A:

Thank you for your question. The information you have received from Toolboxhero is very good. This tractor shows to weigh 516 lbs. I hope this will help you.

Read More
Scott D -
Sears Technician
May 09, 2013
A:

Can somebody tell me how much does a craftsman heavy duty 12 drawers cabinet, model 114498 weight??

Read More
paola -
January 27, 2016
See more answers
Q:

How to remove and reinsert Power Control Board and Cover and the Case? 795.77304600

A:

You will need to remove the lamp lens and then remove 2 screws in the plastic housing near the front corners. Once the screws are removed, you will need to gently but firmly pull the lamp case down. Then you will need to remove the lead wire on the right position and seperate the lamp sockets. At that point you should be able to see the clips that are holding 503e in place.

If you do not feel this is a repair you can do, I recommend scheduling service and having qualified tech come to your home.

Remember to remove power from your refrigerator before installing the control assembly.

Read More
Tamara T -
Sears Technician
October 24, 2014
A:

I need to replace part 503F (3000JJ1001Y) on my model 795.77304600. Is there any guide to show step by step installation procedure on line or in a manual that I can request/order?

Read More
SARA -
November 06, 2015
See more answers