Model #2873 FRIGIDAIRE Free Standing, Gas

  • Gas Range
    3 Results
  • Gas Range Page 2
    3 Results
  • Gas Range Page 3
    3 Results
  • Gas Range Page 4
    3 Results
  • Gas Range Page 5
    3 Results
  • Gas Range Page 6
    3 Results
  • Gas Range Page 7
    3 Results
  • Gas Range Page 8
    3 Results
  • Gas Range Page 9
    3 Results
  • Gas Range Page 10
    3 Results
  • Gas Range
    3 Results
  • Gas Rangefront Cover
    3 Results
  • Backguard
    3 Results
  • Backguard Page 2
    3 Results
  • Burner
    3 Results
  • Burner Page 2
    3 Results
  • Body
    3 Results
  • Body Page 2
    3 Results
  • Top/drawer
    3 Results
  • Top/drawer Page 2
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

why my kenmore 700 model#110.2872*,2873 will not spin on normal load?

A:

I understand how important it is for your washer to be working properly and be able to do heavy loads. While you are waiting for an expert response, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
September 16, 2010
A:

From the description you give I suspect the problem is with the clutch and/or basket drive.

A washer with a weak basket drive might spin a light load but will not spin a heavy load.

Overloading is a difficult thing to argue since no one ever overloads their washer but just a reminder to load the items loosely to the top row of holes in the wash basket.

If the washer will spin fine with little or no load but will not with a full load then I'd suggest changing the clutch and basket drive to fix this problem.

To access the clutch and basket drive requires the transmission be removed. It is not a good do-it-yourself project since the transmission must be removed to access the clutch and basket drive.

One other thing you might try the next time a heavy load doesn't spin. Turn the timer off and then turn it back on and see if things will spin. The not spinning problem can have something to do with the neutral drain but the size of the load wouldn't factor in. With a neutral drain problem a light load might not spin either.

I hope this information is helpful. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
September 17, 2010
See more answers