Model #286A EUREKA Carpet/Floor Sweepers

  • Motor Cover
    3 Results
  • Motor Assembly, Complete
    3 Results
Find part by diagram >

Question and Answers

Q:

door closer doesn't close 79578094900 Kenmore Refrigerator

A:

Thank You for choosing Sears PartsDirect.com. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number 79578094900 and from your description it seems like the door stopper and or the bushing item 243A and 286A. Before removing the door take a look at the way the door closes at the middle hinge and look for any movement or hesistation when trying to close the door. You will need to remove the door from the cabinet. The hinge has 3 screws at the top and once they are removed the door is removeable. Be sure to place a blanket to set the door down. I hope this information helps you with your troubleshooting and I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
 

Read More
Sherman_G_Wallace -
Sears Technician
July 16, 2014
A:

Found the solution. Before I started the job of removing the door to work on the hinges, I decided to try an old trick. I squirted some WD-40 on the hinges, opened and closed the door a dozen times and now it closes by itself, just like new! (No one paid me to say this.)

Read More
PAUL -
July 26, 2014
See more answers
Q:

Kenmore Refrigerator #79579303900, freezer door will not press the button for the light, so the light stays on & doesn't allow the freezer to cycle properly.

A:

Refrigerator not working properly can be quite concerning. I researched your question and I happen to find part # 286A diagram for your Refrigerator but the other 2 I could not find. A suggestion I have is to visit Sears Parts Direct website and speak with a Sears associate to help you get part #243A & part #283 for your appliance. I attached the links below. Hope this helps!

Read More
Dezeray S -
November 16, 2010
A:

I know it can be irritating when the light inside the refrigerator won't go out. Most of the time, this will not require, any parts, to correct this problem. Usually, leveling and adjusting the cabinet will correct this. Adjusting the cabinet, will also adjust the door. If the door still won't make contact with the switch, it then needs to be determined if, the door needs to be raised or if the door is, bowed outward.

The light will not contribute to the vents icing but if the door is not closing good, it will cause the vents to ice up. Again leveling and adjusting the cabinet may solve both problems. I hope this will help you. If you would like more assistance, additional details will be helpful. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
November 17, 2010
See more answers
Q:

LG Model# LDC22720SW Refrigerator door sags

A:

I can understand how the doors sagging can be a big inconvenience, while you wait for the expert to answer i would suggest for you to look at the link down bellow. I hope that it helps and gives you some useful information.

Read More
celene -
October 19, 2010
A:

I can understand your frustration when the doors won't close properly. The information you have already received is correct about leveling the cabinet and using the top door hinges. The most common problem with doors sagging or not aligned properly is because the cabinet is not level. Follow the information listed in the owner's manual to level the cabinet and be sure to use a level. If the doors still sag, loosen the top hinges and try to make an adjustment as listed. If this still won't work, then the door will need to be shimmed up. There are some clips for this purpose. These clips # 4350JA3005B are available at SearsPartsDirect . See attached picture and instructions for installing these clips. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
October 21, 2010
A:

Thank you both very much for your time and info. I'll try your suggestions and see what happens. I'll probably be attacking this issue within the next week or so.. SO, when I get done, I'll repost results. 'cow

Read More
The Madcow -
October 23, 2010
See more answers