Model #2784418791 KENMORE Ranges, Electric

  • Control Panel Section
    3 Results
  • Lower Body Section
    3 Results
  • Oven Door Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Trim And Micro Mounting Section
    3 Results
  • Optional Equipment
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I replace heating element wb44x238 in my wall oven?

A:

Providing a valid model number will help an expert better your search. I have attached a link below showing you where your model number. I hope the links that I have provided is helpful http://www.searspartsdirect.com/partsdirect/part-model/wb44x238?pathTaken=partSearch&prst=0&shdMod=wb44x238.

Read More
Alina F. -
November 04, 2010
A:

The oven model number is 278-4418791. Thanks for the idea.

Read More
dcjulie -
November 04, 2010
A:

First; remove power from the oven by turning off the breaker or disconnecting the power cord. After your sure the power is completely off to the oven open the oven & remove both oven racks. Locate the bake element mounting screws that secures the element to the back wall inside the oven. Remove both screws & slowly pull the element connectors out only far enough to disconnect the wire leads going to both sides of the bake element. You may need a pair of needle nose pliers to help remove the wiring connectors. Reverse the procedure to install the new bake element.

Remember to disconnect power before attempting access.

Read More
biker dave -
Sears Technician
November 04, 2010
See more answers