Model #2783128810 KENMORE Range (gas)

  • Control Panel Section
    3 Results
  • Body Section
    3 Results
  • Oven Door
    3 Results
  • Oven And Broiler Door W/glass
    3 Results
  • Burner Section
    3 Results
  • Wire Harness And Components
    3 Results
  • Filler Kit No. 4006720 (optional)
    3 Results
Find part by diagram >

Question and Answers

Q:

How to turn on gas oven?

A:

I am sorry that you are having some difficulties with your oven and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
February 26, 2013
A:

Thank you!! That was really helpful

Read More
April -
February 26, 2013
A:

Thank you for your question. I'm sorry you are having this problem with your range. The information you have received is very good. This range has the glow bar igniter. If the igniter glows, it does mean there is a circuit to it and the most likely problem will be a weak igniter # WB2X9697. If the igniter does not glow, the problem could be with the control or the igniter. If you would like to have a technician check this, I'm listing a site you can access to have a tech come out. Here is a link for the website: Sears Home Services. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
February 27, 2013
See more answers
Q:

Kenmore gas oven #278-3128810 takes 3 times as long to reach desired temperature, and it doesn't cook the food completely. Why?

A:

I'm sorry to hear that you are having some difficulties with your Range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Priscilla V -
December 08, 2011
A:

I'm sorry to hear that your are having problems with your range. It is normal that the flame in the oven is blue. This mean that the range is getting the maximum amount of air typically of a single height. Decreasing the air will result in a yellowish flame and limiting the air flow to a closed position will result in a red flame. You can try to adjust the air shutter valve to see if adjusting it will give you a better flame. The instructions are provided in an image below. It is most likely that the oven sensor is failing. This would explain why it is taking so long to heat. This is an easy part to replace. The part number is #WB20X136, and you can order it from this link Sears Parts Direct Just remove the two screws and slowly begin pulling the sensor out until you come to a quick disconnect plug. Disconnect the sensor plug and install the new one. I hope this helps.

If you need further assistance, please reply to this thread.

Read More
AnneJ -
Sears Technician
December 09, 2011
See more answers