Model #27684 SAMSUNG Misc Camcorder

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

tractor id 917.27684

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your lawn mower. Upon researching model917.27684;  it appears that the model number is missing a number at the end. I recommend that check under the seat to get the complete model number if the number is the same then add a “0” at the end, so it would be 917.276840.

 I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 21, 2015
Q:

why is pedal control rod in diagram and part # nothing like control rod removed from mower? 917.27684

A:

Thank You for choosing Sears PartsDirect.com. It is unfortunate to hear that you are having issues with your and I do understand your frustration. Glad to help out. I'm looking at your model number91727684 and the part number for the rod is 199000. Here is an image of rod and does appear to be the same of the one in the diagram. The part will fit on the mower. If you are having issues with the installation of the part please resubmit your question for further information. I hope this information helps with your repair. 
 
Thank you for choosing Sears PartsDirect.com. 

Read More
Sherman_G_Wallace -
Sears Technician
July 30, 2014
Q:

briggs 445677-0476 will not charge, the battery & connections are good, is the problem the alternator or the regulator, where is the regulator located 917.27684

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the charging issue you are experiencing with the Briggs engine, I know how frustrating that is to have occur.

If you have a volt meter, you will need it to check the charging system. If you do not have a volt meter, you will need to obtain one. Your local Sears will have one or an auto parts store if a Sears is not near you.
On the right side of the engine you should see the regulator; it is a little square box with 2 or 3 wires connected up to it.On most engines there are 2 wires coming from the alternator into the regulator that will be the same color. Then there will be another color wire (usually red) going from the regulator to the tractor harness. You may have to trace the wires to tell which is which.
With the engine running at full throttle, the wires from the alternator should read 28-35VAC across them. If that voltage is not there, the alternator and/or flywheel (magnets under it) are bad. If the voltage is there, then check for DC voltage between the red wire at the regulator and ground. It should be in the 13-14VDC range at full throttle. If that voltage is not there but the AC "in" is there, then the regulator is bad.
Hope this helps out and thanks for using SearsPartsDirect.com.
 

Read More
Jeff Wallace Sr -
Sears Technician
May 20, 2014