Model #2726 HOOVER Attachments (Vacuum)

  • Motor Assembly, Motorhousing
    3 Results
Find part by diagram >

Question and Answers

Q:

Cleaning a Kenmore frontload washing machine

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
February 21, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not operating as it should.

Grease could be fabric softener; can the spots be removed using warm water and dial or ivory soap?  If the spots can be lifted it is a softener fault, maybe old softener, If the spots are grease, I do not recommend that you scrape the insides of the washer.  To separate the tub halves requires the complete tub be removed from the washer cabinet.  Instead unplug the washer from the wall outlet and turn off the water.  Slid the washer out from the wall and remove the rear panel and check the rear of the tub where the pulley shaft comes through.  Is it leaking from there? If so the bearing is going bad and the cost is pricey, here are some examples.

26

417

131525500

SHELL/BEARIN

1

183.39

183.39

41742142100

FRIGI

 

 

 - Substituted for 26  417  131462800
 - FACT BIN = FRIGI, QTY = 2726 

26

417

134146100

GASKET

1

22.29

22.29

41742142100

FRIGI

 

 

 - Substituted for 26  417  131275900
 - FACT BIN = FRIGI, QTY = 2509 

26

417

131618500

BASKET

1

223.87

223.87

41742142100

FRIGI

 

 

 - FACT BIN = FRIGI, QTY = 1247 

The basket should have a limited lifetime warranty on it.  This price does not count the labor for about 2 hours of work.   

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
February 22, 2013
A:

Thanks for the info and prices for the parts, Bill. I have checked for grease and oil in the back of the machine, but have not seen any. Parts are cheaper than a new washer, which is good to know. I have to assume the grease is old detergent or fabric softener residue. While I don't use fabric softener in my laundry, this is a machine I inherited from the previous tenant, who may have used it during his ownership. I will try the hand soap solution and hope it works! It sounds like cleaning the outer drum is a bit beyond an amateur handyman, such as myself, and should not be attempted. That being the case, is it your recommendation the machine needs to be replaced and sold? Or is there a heavy-duty solution to cut that residue and eliminate the grime, streaks and spots? Thanks again!

Read More
Joe -
February 25, 2013
A:

I would recommend you try to use a product called Affresh first. I will give you a link to use for the product.

Read More
Bill__W -
Sears Technician
February 26, 2013
See more answers
Q:

How do I remove the Housing Mandrel (part 128774) from the Craftsman Lawn Tractor model 917.2726?

A:

You need to attach the mandrel housing to the deck and install the blade on the bottom of the mandrel shaft.

Place a block of wood inside the mower housing so the blade jams on the wood. This will keep the shaft from turning as you loosen the nut on top of the mandrel.

Read More
Jimmy K -
Sears Technician
September 24, 2009