Model #270-3250 POWER PRO (GLT) Snowthrower, Gas

  • Snow Thrower
    3 Results
  • Carburetor
    3 Results
Find part by diagram >

Question and Answers

Q:

Powerpro Sears Snowtrower, model # 270-3250 V Belt

A:

The belt no longer being available can be most frustrating. I did some research on the part and model number but was not able to find a replacement belt. Your expert will be able to help answer your question. It may take two business days for your expert to respond. I do hope that everything works out on the snow thrower.

Read More
Marc -
January 09, 2013
A:

Hello Richard,

I'm sorry that you are having difficulties replacing your auger belt and I would like to assist you. I think that the best and fastest thing that you can do is to take the remnants of your belt to your local auto parts dealer and they will be able to measure it. Most parts dealers have a tool that will give a very accurate measurement of the existing belt, even in a really bad condition. I'm sorry that this part has been discontinued without information, I will attempt to find a suitable replacement too.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
January 11, 2013
A:

unfortunately the belt shredded and I brought what remained of it to Lowes because of the discontinued problem. I found a belt there that looked very close to the size. I put the belt on and I seemed to be a good match until the first snow storm, as soon as I went to use it, I believe it was a bit to tight and it broke immediately so unfortunately the only belt i have left to bring to an auto parts store is apparently the wrong size.

Read More
richard919 -
January 14, 2013
A:

Hello Richard,

I called the manufacturer and was told that a 7360 belt will work in place of the original. That is a Gates belt part number and should be available at local car parts stores. Be sure to take any remnants of the old belt with you. If the belts are shredding, I advise carefully inspecting the pulleys that the belt rides on and the tensioner for any damage or obvious defects. Be sure to carefully look over the belts path for anything that may be damaging the belt. I would also make sure the driven pulley is able to be turned by hand. Be sure to remove the spark plug wire prior to servicing the snow thrower.

Jerry C

Read More
Jerry C -
Sears Technician
January 14, 2013
A:

thank you very much for all of the effort, I will try the 7360 belt. Rich

Read More
richard919 -
January 15, 2013
See more answers