Model #2539282010 KENMORE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I want to change the door gasket on this freezer 2539282010 Kenmore Upright freezer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to replace the gasket on your freezer. 

Click here for videos. 

It is necessary because if it is not loose enought the gasket will not seat properly and can become ripped. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 18, 2015
Q:

Want to change the door swing on an upright freezer.

A:

Changing the door swing may become necessary for fit or function. While you wait for the expert response, I attached two links below that may help.

Read More
Barbara H. -
February 03, 2012
A:

Thank you for your question.

I will be happy to assist you. I have looked up the model number you have submitted. I am sorry the door on this model is not reversible. In fact, most freezer doors are not reversible.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 04, 2012
See more answers
Q:

Issue with drain hose on my upright freezer.

A:

I'm sorry about the difficulties that you are experiencing with your upright freezer. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
January 05, 2011
A:

I can understand your concern. The information you have received is correct. If the drain was all the way up inside the freezer, it would indicate the drain (# 32 in picture) is also out. In this case, I recommend taking the drain hose loose and inserting the drain fitting again. Now you may need to tilt the freezer back, so you can access the drain fitting and reconnect the hose. Be very careful if you tilt the unit back. Either lean it against a wall or shim it up, to make sure it doesn't fall back down. I'm also sending a picture and information from the owner's manual explaining about the drain. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 07, 2011
See more answers

Top Parts