Model #2539276010 KENMORE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

2539276010 Temp Control Wiring 2539276010

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
May 29, 2013
A:

Thank you for your question and I understand your concern.

Since the thermostat has only two terminals, it will not matter which two terminals the two wires will connect to. It will work either way.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
June 01, 2013
See more answers
Q:

My Kenmore freezer model no. 2539276010 has quit freezing. The temp adjustment dial has not been moved. There is no oil underneath like the freon leaked out.

A:

I know how important it is to have a good working freezer in the home so that you can keep your food nice and cool. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Joseph P. -
January 10, 2012
A:

Thank you for your question. I know it can be frustrating when the freezer stops freezing. First, try setting the thermostat to a colder setting. If it freezes ok now, it would be ok to leave the thermostat on the new setting or it can be replaced. Now, if it is cooling but not freezing, it would lead to a sealed system problem. This would require a certified technician to check it and make the repair. If it's not cooling at all, it will first need to be determined if the compressor is running. If it is running, it would again lead to a sealed system problem. If the compressor is not running the problem could be with the compressor or the starting device on the compressor.

If it's not running at all, it will lead to the defrost timer or thermostat. In this case, turn the thermostat all the way off and back on again. If the contact is stuck, sometimes this will free it but the thermostat will still need to be replaced. If it still won't run, turn the dial on the timer, which is located next to the compressor. If it starts now, the timer will need to be replaced. This is quite a bit but I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
January 12, 2012
See more answers
Q:

Replacing a freezer seal

A:

Are you refering to the door seal?

Read More
davey_dave -
September 01, 2011
A:

Are you refering to the door seal?

Read More
davey_dave -
September 01, 2011
A:

A freezer seal is a very important part of a refrigerator because it is what keeps the door sealed keeping your foods nice and frozen. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
September 01, 2011
A:

If it is the door gasket your referring to then theres not acually a specific time frame to follow. Its really just a matter of inspecting the gasket for cracks, crumbling, or leaking. If you notice any of the these symptoms, or a gap between the gasket and the frame, then its usually time to replace. The price on that gasket through sears parts direct is 108.47. You could give us a call @ 1-800-469-4663 to order it.

Read More
davey_dave -
September 02, 2011
A:

Thank you for your question.

The only reason you would ever replace the door gasket is if it is torn. They will usually start to rip near the corners. I recommend inspecting the gasket if it is torn it is time to replace it. If you are just having a problem with it sealing I recommend cleaning the gasket with warm soapy water. You will also need to clean face of the cabinet. Then close the door and see if it seals better. If you still see a gap in the gasket use a hair dryer to heat the gasket. This should make the gasket soft enough for the magnet you seal the gasket. Once it is sealed, do not open the door for a few hours.

I hope this is helpful. Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 03, 2011
See more answers

Top Parts