Model #2538293981 KENMORE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • Liner
    3 Results
  • Unit
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Why is my freezer door not closing correctly after replacing the door gasket?


New gaskets can be a little bit tricky sometimes. It sounds like you tightened all the screws too soon. Go back & loosen each screw just about 2-3 turns. Close the door carefully & force it against the sealing surface. Take a hair dryer & carefully warm up the gasket while holding the door shut. Do this around the complete perimeter of the door gasket. Be careful not to get too close with the hair dryer & keep it moving. The gasket should start to form a sealing surface. After aligning the door, retighten each screw. Leave the door duct taped shut for 24 hours.

Read More
biker dave -
Sears Technician
September 11, 2008