Model #25379232703 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Loud sound when lower door closes 25379232703 Kenmore Refrigerator

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your refrigerator and I do understand your frustration. Glad to help out. I'm looking at your model number 25379232703 and I recommend using the instructions in the owners manual page 7 regarding removing the door to verify that the door is properly secured to the cabinet. I recommend checking the middle hinge and the lower hinge on the fridge door. The door also has hinge bearing item 22 and item 13 on the fridge door that I recommend examining for damage. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
 

Read More
Sherman_G_Wallace -
Sears Technician
February 11, 2015
Q:

Refridgerator door shelf won't mount solidly to the door.

A:

I understand how frustrating it can be having to work on replacing the part on your refrigerator and to have it not work. While you are waiting for a detailed reply from an expert I recommend revisiting the Sears parts direct website were you can speak with a sears associate in regards to the part. I have provided the link below. Hope this helps!

Read More
Priscilla V -
July 31, 2012
A:

I know that it can be very difficult to have issues with your refrigerator shelves. However, the shelf 240338101 is the original part for this model. It has not been substituted for anything different. This should fit exactly like the old one. Since it is not, then I would suggest that your return this for a new one. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 31, 2012
A:

Yes I already chatted with a Parts Direct rep quite a bit. I have the correct part. The problem is that it is slightly bent and, according to the Parts Direct rep, they are all going to come the same way. Since it is bent, it won't sit on the ledge correctly as you can see from the picture that I attached. Do I REALLY need to bend and modify a part just to make it work?

Read More
Corey -
July 31, 2012
A:

I solved my own problem...YES, I had to heat the shelf up and reform it to fit the door. In fact, I put some wood on the inside of the shelf to push the hooks on the end out and hold them there. I then put them in my BBQ...top shelf where the bread goes...and turned it on as low of a heat as I could. I baked the shelf at 350 degrees or so. Yes, I BBQ'ed my plastic refrigerator's shelf!

Read More
Corey -
August 23, 2012
See more answers

Top Parts