Model #25379132990 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Model# 25379132990 Kenmore refrigerator is not cooling. Freezer is working. Do not have ice maker hooked up (never has). Recently moved downstairs to basement Model# 25379132990

A:

Thank you for the inquiry and for using SearsPartsDirect.com. I am sorry to hear of the warming inside of the refrigerator, I know how frustrating that is.

The first thing I would check would be the vent leading into the refrigerator, to make sure nothing is blocking it and preventing the cool air into the refrigerator.

When you open the freezer, do you hear the evaporator fan motor running? That would circulate the cold air into the refrigerator, and if it's not running, that could be the source of the issue.

Also, there is a thermostat within the control section that can be checked with a multimeter. The thermostat would tell the freezer/damper when to open to allow the cold air to circulate into the refrigerator, and if the thermostat isn't sensing the temperature properly, cold air won't circulate into the refrigerator when needed. More than likely, the thermostat will be the source of the issue if the vent isn't being blocked by food or ice.

If by chance the evaporator motor isn't running or we need a new thermostat, I have included blue links below that you may click on to be directed to the PartsDirect page to view and purchase the necessary part.

Evaporator Fan Motor for Model 25379132990

Thermostat for Model 25379132990

If you have any further questions or inquires, please don't hesitate to ask. Thanks for using Sears PartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 11, 2013
Q:

How do you put a refrigerator front door gasket on?

A:

I think its great that you are wanting to do some repairs on your own. From the link I have provided it seems that heat will be needed to tighten up the gasket around the door. I hope my link helps while you wait for your expert response.

Read More
Joseph P. -
February 02, 2012
A:

Thank you for your question.

I am sorry are having a problem installing the door gasket. The easiest way to install the gasket is to remove the whole door. Then lay the door on a table with the handle hanging over the edge. This will keep the door from warping when the gasket is replaced. Loosen the screws around the edge of the door and adjust the gasket so that if fits. Then tighten the screws making sure the gasket does not move. If the gasket has any wrinkles, you can remove them by carefully heating the gasket with a hair dryer. Once the wrinkles are removed, reinstall the door. If the gasket seems to be binding on the hinge side of the door, you and apply a thin coat of Vaseline to the front of the cabinet. this will allow the gasket to slide instead of binding. Once the door is closed look along the gasket. If you find that the gasket is not sealing, you can heat that area with a hair dryer. This will make the gasket more pliable and the magnet should pull the gasket to the front of the cabinet. Once it is sealed, keep the door closed for a few hours.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 05, 2012
See more answers
Q:

odel #25379132990 its done this last yr too so should i get a new one or is it going to keep happing

A:

A refrigerator is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
aashe -
November 28, 2011
A:

Thank you for your question. I'm sorry you are having this problem. If the unit is running constantly but not cooling good in both sections, it will indicate a problem in the sealed system. A certified technician will be required to make this type of check.

If this unit is located in a location where the ambient temperature can get high, the compressor could be short cycling. In this case, there is a fan kit # 5304411775 that can be installed, to help keep the compressor from overheating and quitting. I hope this helps you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
November 30, 2011
See more answers

Top Parts