Model #25378232800 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator size 25378232800 Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your refrigerator.

From the information you have provided above, after researching model number 253.78232800.

This model is a total of 20.6 cubic feet.

The refrigerator side is 15.3 cubic feet.

The freezer side is 5.3 cubic feet.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
July 04, 2015
Q:

Why won't the ice maker fill with water?

A:

If the ice maker is not filling, it could be a problem with the ice maker not sending a signal to the water valve or the valve could be defective. This ice maker can be cycled manually to help determine the problem. To cycle this ice maker, remove the front cover and you will see a large and small gear. Rotate the small gear counterclockwise, this will start the ice maker into a cycle. If it still won't cycle the ice maker will need to be replaced. If it does start, watch it through the complete cycle to see if it will fill at the end. If it cycles and fills, this will indicate the thermostat in the ice maker is not cycling the ice maker and will need to be replaced. If it cycles but doesn't fill, this will probably be a defective water valve but some voltage checks will need to be made to determine for sure. A technician may be required to make these checks.

Read More
Scott D -
Sears Technician
March 16, 2009
A:

like i said, i replaced both the ice maker and the valve and still no ice so there must be a problem with something else.

Read More
steve -
July 24, 2013
See more answers
Q:

Need deminsions of an appliance part.

A:

Needing the dimensions for your appliance is a very great question to know. While you are waiting on an expert to answer your question, I searched your question in Sears Parts Direct website and found your manual for your Refrigerator. I attached the link below. Hope this helps!

Read More
Dezeray S -
November 16, 2010
A:

It's not very often the dimensions of a part will be listed. Unfortunately, the dimensions for this glass insert cover are not available. The only way to get the dimensions, will be to, measure the existing part or the area it fits in. If you would like more assistance, additional details will be helpful. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
November 17, 2010
See more answers

Top Parts