Model #25377132791 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Icemaker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Product specifications 25377132791 Kenmore Top mount refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 

For Kenmore top-mount refrigerator model 253.77132791, the cu/ft capacity is 21 cu/ft. Kenmore refrigerator models will identify the cu/ft capacity in the third number past the prefix of 252. In this case, numeral 1 indicates 21 cu/ft. 

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
January 11, 2014
Q:

The Ice cubes taste terrible, is there not a water filter to replace?? 25377132791 Kenmore Top mount refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
May 08, 2013
A:

I know that it can be very frustrating to have issues with your ice maker. You do not have a filter on this model. It only has the tube that connects the ice maker to the water valve. You can try to replace the line but it is very difficult.  The tube is one length and you need to cut it to fit.  If you don't feel comfortable doing this yourself and would like to schedule service, please click on this link: Sears Home Services. If you need further assistance, please reply to this thread. Thank you for using Manage My Life. 

Read More
AnneJ -
Sears Technician
May 08, 2013
See more answers
Q:

Why doesn't my Kenmore refrigerator 25377132791 cool properly?

A:

If it's not cooling in either section, it could be a seal system or compressor related problem. It could also be a fan motor or defrost related problem. If everything is running but there is no frost at all in the freezer, this will probably be a problem with the seal system or compressor. It could be a low charge, a restriction or a failed compressor.

If either of the fan motors fails, it will quit cooling. If the evaporator motor quits, the first thing you will notice, is a heavy frost on the back wall of the freezer and the refrigerator section will stop cooling. Eventually the freezer will also stop freezing.

If the defrost system fails, it will have the same effect as the evaporator motor. The motor will continue to run but there will be a heavy frost build-up. Again the refrigerator section will stop cooling and eventually the freezer will stop freezing.

A technician will be required to make these checks. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
April 10, 2009
A:

PULL IT AWAY FROM THE WALL..U NEED TO HAVE AN AIR GAP SO IT CAN COOL PROPERLY

Read More
HURTME1 -
April 13, 2009
See more answers

Top Parts