Model #2537482240G KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Bottom of Kenmore fridge is not cold and top freezer is working fine. Model 235.7482240G, this has been happening for a while, we think the power outages this

A:

I understand that the bottom of your Kenmore refrigerator is not cold but your freezer is working like normal. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
October 27, 2012
A:

Hi,

Thank you for your question, and I would like to answer the question this way.
The model number must have gotten transcribed differently as it is not a functioning model number. I will need the correct model number to recommend correct parts.

As far as what you describe, it could be the cold control for the refrigerator or the damper that is faulty, and not opening to cool the refrigerator.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
October 29, 2012
A:

Im sorry the model number is 253.7482240G, serial number is BA63630912, manufactured in 09-06. I just got a number backwards.

Read More
Amanda -
October 29, 2012
A:

On the thermostat , it sits in the air diffuser and regulates the temperature in the fresh food section. As the fan in the freezer section turns the air through the air diffuser is regulated by the cold control. If the air opening to the refrigerator is open and the cold control is in the airway, this indicates a cold control. This is the control located on the right side of the panel in the refrigerator section.

Read More
Bill__W -
Sears Technician
October 30, 2012
See more answers
Q:

What can cause my refrigerator not to run?

A:

If no function at all works not even the lights it will indicate there is no voltage going to the refrigerator. It could be a tripped breaker or a broken wire. If the lights work then there is voltage to the unit and the problem will probably be with the controls. Without a model number I can't determine what type of controls you have. If this has electronic controls you can try unplugging the unit from the wall for a few seconds then reconnect it. If the unit runs it will indicate the main board will need to be replaced. When the power is disconnected then reconnected it reprograms the board and it may work for awhile. I hope this will help you. If you need more assistance you can resubmit your question with additional details and a complete model number.

Read More
Scott D -
Sears Technician
A:

Thanks so much Scott. The model number is 2537482240G, it's a kenmore top mount. The light comes on, but like I said, it doesn't run. I am thinking it might be the overload/relay. Is that something that I can do, or do I need a tech? thanks

Read More
Teddy -
December 19, 2011
A:

Refrigerator is plugged but no power. Breaker checked and wire cable checked but still no power to the refrigerator. Model number Kenmore 795.5881.

Read More
Kris -
February 02, 2012
See more answers
Q:

My Kenmore refrigerator with freezer on top. In the freezer the fan that moves the air does not shut off.

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
January 12, 2012
A:

I know that it can be very frustrating to have your refrigerator stop working properly. The evaporator fan should cycle on and off but it will cycle differently then normal. Even with the compressor off, if the fridge section warms up, the sensor will send a signal to the control and bring the fan on. With this style it can seem like the motor is always running. However, even if it did run constantly, this is a low voltage dc motor that takes very little current. The most likely cause for this problem is the temperature control (part # 5304421256), but you do not indicate whether or not the refrigerator is cooling. If it is not, then replace the control.

If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 13, 2012
See more answers

Top Parts